Page 121 / 237
Scroll up to view Page 116 - 120
OxyGEN
mini
Office
Administrator’s Guide
Black List
The
Black List
configuration page allows you to block incoming calls from selected calling numbers.
Figure 10.14: Black List of Numbers
In order to activate this feature, enter the black-listed numbers in the list of input fields under the
Rejected Calling Numbers
heading and click
Apply
to save your settings.
Gennet s.a.
121
Page 123 / 237
11
Advanced Menu
The
Advanced
configuration menu allows the configuration of a series of different advanced services
offered by the OxyGEN miniOffice. It includes the following sub-menus:
Dynamic DNS
Date and Time
IPv6 Tunnel
SSL VPN
GRE Tunnel
VPN Tunnel
QoS Policy
Device Detection
Radius Server
File Sharing
Printing
123
Page 124 / 237
OxyGEN
mini
Office
Administrator’s Guide
Dynamic DNS
The Dynamic DNS service (also known as DynDNS service) allows Internet users with dynamic IP address
broadband access to register a domain name.
This way it is possible to access their home network
through a fixed hostname, despite the fact that their IP address changes frequently.
The OxyGEN
miniOffice supports different Dynamic DNS service providers.
Figure 11.1: Dynamic DNS
To enable the Dynamic DNS service:
1. Select Enabled as Dynamic DNS
Status
.
2. Specify the Service
Type
,
Hostname
,
Username
and
Password
.
3. Click
Apply
.
Note
You must first create an account at a Dynamic DNS service provider and configure the
corresponding
Hostname
,
Username
and
Password
, before activating the service on
the OxyGEN miniOffice.
Gennet s.a.
124
Page 125 / 237
OxyGEN
mini
Office
Administrator’s Guide
Date and Time
This sub-menu lets you configure the Simple Network Time Protocol (SNTP) client settings. This client allows
the OxyGEN miniOffice to contact a configured Network Time Protocol (NTP) server and obtain the
current date and time values.
Figure 11.2: SNTP Client
To configure the SNTP client:
1. Select the
Time Zone
from the drop down list.
2. Specify the
NTP Server
hostname or IP address.
3. Optionally set a second
NTP Server
hostname or IP address
4. Optionally select also the
Interval
between two successive update attempts.
5. Click
Apply
.
The OxyGEN miniOffice offers also the possibility of operating as an NTP proxy for all hosts on the
LAN. In order to activate this functionality, make sure that the
Local NTP server
checkbox is checked.
Gennet s.a.
125