Page 56 / 104
Scroll up to view Page 51 - 55
µ³
FR-300RTR User Manual
Sect±on 3 - Configurat±on
Time Settings
Select the Time Zone from the drop-down
menu.
To select Daylight Saving time manually, select
enabled or disabled, and enter a start date and
an end date for daylight saving time.
NTP is short for Network Time Protocol. NTP
synchronizes computer clock times in a network
of computers. Check this box to use a NTP
server. This will only connect to a server on the
Internet, not a local server.
Enter the NTP server or select one from the
drop-down menu.
To manually input the time, enter the values
in these fields for the Year, Month, Day, Hour,
Minute, and Second and then click
Set.Time
.
You can also click
Copy.Your.Computer’s.Time.
Settings
.
Time Zone:
Daylight Saving:
Enable NTP
Server:
NTP Server Used:
Manual:
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system
clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also
be configured to automatically adjust the time when needed.
Page 57 / 104
µ3
FR-300RTR User Manual
Sect±on 3 - Configurat±on
SysLog
The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs
to a SysLog server on your network.
Enable
Logging
to SysLog
Server:
SysLog
Server IP
Address:
Check this box to send the router logs to a
SysLog Server.
The address of the SysLog server that will be
used to send the logs. You may also select
your computer from the drop-down menu (only
if receiving an IP address from the router via
DHCP).
Page 58 / 104
µ´
FR-300RTR User Manual
Sect±on 3 - Configurat±on
E-mail Settings
The Email feature can be used to send the system log files, router alert messages, and firmware update notification
to your e-mail address.
Enable Email
Notification:
From Email
Address:
To Email Address:
SMTP Server
Address:
Enable
Authentication:
Account Name:
Password:
On Log Full:
On Schedule:
Schedule:
When this option is enabled, router activity logs
are e-mailed to a designated e-mail address.
This e-mail address will appear as the sender
when you receive a log file or firmware upgrade
notification via e-mail.
Enter the e-mail address where you want the
e-mail sent.
Enter the SMTP server address for sending
e-mail. If your SMTP server requires authentication,
select this option.
Check this box if your SMTP server requires
authentication.
Enter your account for sending e-mail.
Enter the password associated with the account.
Re-type the password associated with the account.
When this option is selected, logs will be sent via e-mail when the log is full.
Selecting this option will send the logs via e-mail according to schedule.
This option is enabled when On Schedule is selected. You can select a schedule from the list of defined schedules. To create
a schedule, go to
Tools.>.Schedules
.
Page 59 / 104
µµ
FR-300RTR User Manual
Sect±on 3 - Configurat±on
Use this option to save the current router
configuration settings to a file on the hard disk
of the computer you are using. First, click the
Save
button. You will then see a file dialog,
where you can select a location and file name
for the settings.
Use this option to load previously saved
router configuration settings. First, use the
Browse control to find a previously save file
of configuration settings. Then, click the
Load
button to transfer those settings to the router.
This option will restore all configuration settings
back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router configuration
settings, use the
Save
button above.
Click to reboot the router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to Factory
Default Settings:
Reboot Device:
System Settings
Page 60 / 104
µ¶
FR-300RTR User Manual
Sect±on 3 - Configurat±on
Click on
Check.Online.Now.for.Latest.Firmware.
Version
to find out if there is an updated firmware;
if so, download the new firmware to your hard
drive.
After you have downloaded the new firmware,
click
Browse
to locate the firmware update on
your hard drive.
Click
Upload
to complete the
firmware upgrade.
Check
Automatically.Check.Online.for.Latest.
Firmware.Version
to have the router check
automatically to see if there is a new firmware
upgrade.
Check
Email.Notification.of.Newer.Firmware.
Version
to have the router send an e-mail when
there is a new firmware available.
Firmware
Upgrade:
Browse:
Notifications
Options:
Upgrade Firmware
You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive
of the computer. Click on
Browse
to locate the firmware file to be used for the update. Please check the Fry’s support
drive from the Fry’s support site.
19216811.live