1. Home
    2. /
  2. Manuals
    3. /
  3. FRITZ
    4. /
  4. WLAN-7340
    5. /
  5. 7
Page 31 / 190 Scroll up to view Page 26 - 30
31
Configuring an Internet Connection Automatically over DSL
Automatic
Configuration
Procedure
Proceed as follows to perform automatic configuration:
1.
Connect the FRITZ!Box to the DSL line.
The automatic configuration starts automatically.
2.
Wait until the automatic configuration has conclud-
ed. This process can take around five to ten minutes.
During this time the FRITZ!Box receives all necessary
settings directly from the autoconfiguration server of
your Internet Service Provider.
After automatic configuration you can surf the web
right away and use any other contracted services
(like Internet telephony).
3.
To check that the automatic configuration was com-
pleted successfully, open a web browser and enter
any Internet address.
Then you may want to try out the other services or-
dered from your Internet Service Provider, such as In-
ternet telephony.
Your Internet Service Provider transmitted you informa-
tion about the configuration of your Internet connection.
Always perform the Internet connection setup as de-
scribed by your provider!
Further settings can be configured in the user interface of
your FRITZ!Box. The “Wizards” area offers easy-to-use,
step-by-step instructions on all important functions. Use
these to set up the FRITZ!Box in accordance with your own
needs.
Page 32 / 190
Configuring the Internet Connection via DSL Using the Wizard
32
5.2
Configuring the Internet Connection via DSL Using the Wizard
If the FRITZ!Box is connected directly to the DSL line, the
account information from your Internet Service Provider is
required to configure the Internet connection in the
FRITZ!Box.
Use the Wizard to configure the Internet connection:
1.
Open the FRITZ!Box user interface.
2.
Select the “Wizards” menu.
3.
Click the “Check Internet Connection” Wizard and fol-
low the instructions.
5.3
Configuring the Internet Connection via DSL Manually
Changes to the Internet connection settings can be made
in the FRITZ!Box user interface.
Proceed as follows:
1.
Open the FRITZ!Box user interface.
2.
Select the “Internet / Account Information” menu.
3.
Configure the desired settings. Take advantage of the
Help available in the FRITZ!Box user interface for
more information and instructions.
4.
As a final step, click “Apply”.
If the FRITZ!Box is connected to a DSL modem or a DSL
router, or integrated into an existing network, you must al-
so configure your Internet connection as described above.
To do so, enable the expert setting in the “System / Expert
Mode” menu.
Page 33 / 190
33
Internet Connection via Cable Modem
5.4
Internet Connection via Cable Modem
With an additional cable modem you can also use your
FRITZ!Box Fon WLAN 7340 on a cable connection. Then the
Internet connection is established and controlled by the
FRITZ!Box itself, so that in this operating mode, too, all
FRITZ!Box functions (like Internet telephony, firewall) are
available without restriction.
1.
Use a network cable to connect the cable modem
with the “LAN 1” port on the FRITZ!Box.
2.
Connect a computer with the FRITZ!Box either wire-
lessly via WLAN or using a network cable.
3.
Open the FRITZ!Box user interface.
4.
Enable the expert setting of the FRITZ!Box in the “Sys-
tem / Expert Mode” menu. Confirm by clicking “Ap-
ply”.
5.
Open the “Internet / Account Information” menu.
6.
On the “Settings” tab, select the connection type “In-
ternet connection via LAN 1” from the “Connection”
area.
7.
In the “Operating Mode” area, enable the option “Es-
tablish own Internet connection (NAT router with
PPPoE or IP)”.
8.
In the “Account Information” area, select the option
“No account information required (IP)”.
9.
In the “Connection Settings” area, enable the option
“Obtain the IP address automatically (DHCP)”.
10.
In the input fields “Upstream” and “Downstream”,
enter the relevant speeds of your Internet connec-
tion.
11.
Save your settings by clicking “Apply”.
12.
Then restart the cable modem, for instance, by un-
plugging it briefly from the electrical outlet.
Now the Internet connection of the FRITZ!Box will be es-
tablished over the cable modem.
Page 34 / 190
Internet Connection via the Mobile Telephone Network
34
5.5
Internet Connection via the Mobile Telephone Network
In situations where DSL is not available, you can use your
FRITZ!Box Fon WLAN 7340 to connect to the Internet via
the mobile telephone network. A USB modem for mobile
Internet access (UMTS/HSPA) is required for this.
The USB modem is simply inserted into the USB port of
the FRITZ!Box.
The FRITZ!Box supports UMTS/HSPA modems from various
manufacturers.
When the mobile telephone network function is used, the
FRITZ!Box user interface presents information about net-
work availability, connection status and transmission rate.
1.
Insert the USB modem into the USB port on the
FRITZ!Box.
2.
Open the FRITZ!Box user interface.
The “Overview” page is displayed.
3.
Click the “Home Network / USB Devices” menu. On
the “Overview of Devices” tab, the USB modem is
displayed as a “Mobile telephone network modem”.
4.
Click “Enable mobile telephone network modem
now”.
The “Mobile Telephone Network” menu opens to let
you set up the USB modem.
5.
Configure the settings for your Internet connection
over the mobile telephone network. For more infor-
mation, see the Online Help of the FRITZ!Box.
The “Mobile Telephone Network” menu is not avail-
able until the USB modem has been connected to
the FRITZ!Box. From this point on the menu is always
available, even when the USB modem has been dis-
connected.
Page 35 / 190
35
Surfing the Net
5.6
Surfing the Net
Once you have set up the Internet connection in your
FRITZ!Box, you can surf the Internet with any computer
connected to the FRITZ!Box.
1.
Start a web browser on your computer.
2.
Enter in the address field the URL of the web page
you would like to visit, for instance
Due to technical limitations on the part of the mobile tele-
phone network carriers, some limitations may arise for In-
ternet telephone calls and for applications requiring an
incoming connection. The same is true for using port for-
warding, sharing USB storage memory, remote mainte-
nance via HTTPS, dynamic DNS and VPN. Contact your
network provider for details on any restrictions that may
apply.

Rate

4 / 5 based on 1 vote.

Popular FRITZ Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top