1. Home
    2. /
  2. Manuals
    3. /
  3. FRITZ
    4. /
  4. WLAN-7170
    5. /
  5. 8
Page 36 / 140 Scroll up to view Page 31 - 35
Entering Numbers for Calls over Fixed Lines
FRITZ!Box
36
6.
Enter the account information you received from your
Internet telephony provider in the appropriate fields.
7.
Click the “Apply” button.
The new number is added to the list of Internet numbers.
5.2
Entering Numbers for Calls over Fixed Lines
For fixed-line telephony your fixed-line numbers must be
configured in the FRITZ!Box. Proceed as follows:
1.
Start a web browser.
2.
Enter
fritz.box
in the address field.
3.
Select the “Settings” menu.
4.
Click the “Extensions” command in the “Telephony”
menu.
5.
Select the “Fixed-line Numbers” page.
6.
Specify whether your fixed line is an ISDN line or an
analog line.
7.
Enter the ISDN numbers (MSNs) or the analog number
in the corresponding fields.
8.
Click the “Apply” button.
5.3
Configuring Analog Equipment
FRITZ!Box is configured so that you can make calls to the
analog network immediately after connecting analog termi-
nal devices, without any additional settings required.
The following settings are preconfigured at the analog lines
“FON 1”, “FON 2” and “FON 3”:
°
calls can be accepted on all three lines: connected ter-
minal devices will ring at the same time
°
outgoing calls can be conducted on all three lines
Page 37 / 140
FRITZ!Box
37
Configuring Analog Equipment
If the connected terminal devices are to react only to certain
numbers, numbers must be assigned to the extensions.
The number defined as “Number of the extension” also de-
fines whether calls from this extension will be conducted
using the fixed-line network or the Internet.
To do this, perform the following steps:
1.
Start a web browser.
2.
Enter
fritz.box
in the address field.
3.
Select the “Settings” menu.
4.
Click the “Extensions” command in the “Telephony”
menu.
5.
On the “Overview” page, click the button next to the
number of the extension to change its properties.
6.
If the terminal equipment is to react only to the speci-
fied number, remove the checkmark from the check-
box “React to all numbers”.
7.
Select the desired number from the “Number of the
extension drop-down menu”.
The device connected to the “FON 1” extension reacts
to incoming calls placed to this number and uses the
kind of connection specified for outgoing connections
with this number.
8.
If you would like to assign additional numbers to the
extension, select from the “Additional numbers” drop-
down menus any other numbers the device at the
“FON 1” line should react to for incoming calls.
9.
Click the “Apply” button.
10.
If desired, set up the “Extension FON 2” and the “Ex-
tension FON 3” in the same manner.
Page 38 / 140
Configuring ISDN Telephones
FRITZ!Box
38
5.4
Configuring ISDN Telephones
Up to eight ISDN phones can be connected to the
FRITZ!Box. Connect the ISDN telephones to the ISDN S
0
port
“FON S
0
”.
The following ISDN services are supported for Internet tele-
phony:
voice, telephony, audio 3.1 and fax G2/G3.
All other ISDN features are supported on the ISDN line. Out-
going connections with these ISDN service indicators are
automatically routed via the ISDN line.
Assigning Internet and Fixed-Line Numbers to ISDN
Telephones
If the connected ISDN telephones should only react to cer-
tain numbers, MSNs must be configured in the ISDN tele-
phones.
Proceed as follows to specify whether calls are conducted
on the fixed-line network or over the Internet:
No MSNs Are Configured in the ISDN Telephone
If no MSNs are configured in the ISDN telephone, the main
phone number is used for outgoing calls. The main number
is listed in the “Telephony / ISDN Terminal Devices” menu.
°
If the main number is a fixed line, all calls will be con-
ducted on the fixed-line network.
°
If the main number is an Internet number, all calls will
be conducted over the Internet.
MSNs Are Configured in the ISDN Telephone
°
If you specify an Internet number as the outgoing MSN
in the ISDN telephone, outgoing calls will be conduct-
ed over the Internet.
Internet numbers can be set up in the ISDN phone just
like MSNs.
Page 39 / 140
FRITZ!Box
39
ISDN PBXs on FRITZ!Box
°
If you have entered only fixed-line numbers as MSNs
in the ISDN telephone, all calls will be conducted on
the fixed-line network. If you want to use Internet tele-
phony, you must replace an MSN with an Internet
number.
See the documentation for your ISDN telephone for instruc-
tions on setting up MSNs.
In FRITZ!Box you can enter additional Internet or fixed-line
numbers, which can then be assigned to the ISDN tele-
phones. A list of all registered numbers is displayed after
selecting “Telephony / ISDN Terminal Devices” in the
menu.
All of the MSNs set up in the ISDN terminal devices must al-
so be entered in FRITZ!Box.
5.5
ISDN PBXs on FRITZ!Box
ISDN PBXs can be connected to the ISDN S
0
port “FON S
0
”
of the FRITZ!Box.
The following ISDN services are supported for Internet tele-
phony:
voice, telephony, audio 3.1 and fax G2/G3.
All other ISDN features are supported on the ISDN line. Out-
going connections with these ISDN service indicators are
automatically routed via the ISDN line.
When PBXs are connected, only the ISDN BRI (basic rate in-
terface) is supported.
1.
If not all of your MSNs have been configured in the
PBX, enter your MSNs now. The MSNs must match the
numbers registered in the FRITZ!Box. In the “Telepho-
ny / ISDN Devices” menu, all of the numbers regis-
tered in the FRITZ!Box are displayed in the “Existing
Numbers” list.
Page 40 / 140
Dialing Rules for Internet and Fixed-Line Telephony
FRITZ!Box
40
2.
If you want to use Internet telephony, the Internet
numbers must be set up in the ISDN PBX. The Internet
numbers are then assigned to the extensions of the
PBX as outgoing numbers.
See the documentation for your ISDN PBX for instructions
on setting up MSNs.
5.6
Dialing Rules for Internet and Fixed-Line Telephony
Dialing rules specify when calls are conducted on the fixed-
line network, and when they take place over the Internet.
1.
Start a web browser.
2.
Enter
fritz.box
in the address field.
3.
Select the “Settings” menu.
4.
Click the “Dialing Rules” command in the “Telephony”
menu.
5.
On the “Dialing Rules” page you can define the kind of
connection for ranges of numbers.
All connections to number ranges for which a dialing
rule has been defined are established using the speci-
fied connection type.
6.
Click the “New Dialing Rule” button to define as many
dialing rules as desired.
7.
Click the “Apply” button.

Rate

4.5 / 5 based on 2 votes.

Popular FRITZ Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top