Page 131 / 180 Scroll up to view Page 126 - 130
Switching the Alarm On and Off
131
19.4
Switching the Alarm On and Off
You can use the telephones connected to the FRITZ!Box as
alarms. The alarm can be set individually and enabled or dis-
abled at any time.
Configuring the Alarm for a Telephone
N
Pick up the handset.
r881s
<time>
s
<internal telephone num-
ber>
s
Defines the time at which the telephone
with the specified internal telephone
number will ring.
For instance, enter
r881s0700s1s
if the tele-
phone on the “FON 1” socket should
ring at 07:00 a.m.
Internal numbers:
Socket “FON 1” of the FRITZ!Box: 1
Cordless DECT telephones: 610 – 615
IP telephones: 620 – 629
r91ss
Save your settings.
O
Hang up the receiver.
Enabling the Alarm
N
Pick up the handset.
r881ss
Enable the alarm function.
r91ss
Save your settings.
O
Hang up the receiver.
Disabling the Alarm
N
Pick up the handset.
r881r
Disable the alarm.
r91ss
Save your settings.
O
Hang up the receiver.
Page 132 / 180
132
Setting Up Call Diversion
19.5
Setting Up Call Diversion
With call diversion you can divert incoming calls. The calls are
diverted to an external telephone line or to a certain tele-
phone connected with your FRITZ!Box.
If your telephony provider supports direct diversion of incom-
ing calls, calls will be diverted by your provider. Otherwise the
FRITZ!Box establishes a second connection to divert the call.
In either case, call diversion to an external line will be
charged at your contracted telephone rates.
Configuring Call Diversion for All Calls
You can set up call diversion for all incoming calls.
For the destination number, enter a complete fixed-line or In-
ternet telephone number. Internet telephone numbers may
not contain letters or special characters.
Configuring Call Diversion for All Incoming Calls
N
Pick up the handset.
Enter one of the following three key se-
quences:
s21s
<DNo>
sr
Configures immediate call diversion to
the destination number <DNo>.
s61s
<DNo>
sr
Configures delayed call diversion (after
20 seconds) to the destination number
<DNo>.
s67s
<DNo>
sr
Configures call diversion on busy to the
destination number <DNo>.
Calls will be diverted when the telephone
number called is busy.
Q
Wait for the positive acknowledgement
tone.
O
Hang up the receiver.
Page 133 / 180
Setting Up Call Diversion
133
Configuring Call Diversion for the Outgoing Telephone
Number
You can set up call diversion for all calls that arrive for the
outgoing number of the telephone.
Disabling Call Diversion for All Incoming Calls
N
Pick up the handset.
Enter one of the following three key se-
quences:
s21ssr
Disables immediate call diversion.
s61ssr
Disables delayed call diversion.
s67ssr
Disables a call diversion on busy.
Q
Wait for the second-long positive ac-
knowledgement tone.
O
Hang up the receiver.
For the destination number, enter a complete fixed-line or In-
ternet telephone number. Internet telephone numbers may
not contain letters or special characters.
Configuring Call Diversion for Outgoing Telephone Numbers
N
Pick up the handset.
Enter one of the following three key se-
quences:
s21s
<DNo>
r
Configures immediate call diversion to
the destination number <DNo>.
s61s
<DNo>
r
Configures delayed call diversion (after
20 seconds) to the destination number
<DNo>.
s67s
<DNo>
r
Configures call diversion on busy to the
destination number <DNo>.
Q
Wait for the second-long positive ac-
knowledgement tone.
O
Hang up the receiver.
Page 134 / 180
134
Setting Up Call Diversion
Configuring Call Diversion for a Certain Telephone Number
You can set up call diversion for all calls that arrive for a cer-
tain telephone number.
Disabling Call Diversion for the Outgoing Telephone Number
N
Pick up the handset.
Enter one of the following three key se-
quences:
s21sr
Disables immediate call diversion.
s61sr
Disables delayed call diversion.
s67sr
Disables a call diversion on busy.
Q
Wait for the second-long positive ac-
knowledgement tone.
O
Hang up the receiver.
For the destination number, enter a complete fixed-line or In-
ternet telephone number. Internet telephone numbers may
not contain letters or special characters.
Configuring Call Diversion for a Certain Telephone Number
N
Pick up the handset.
Enter one of the following three key se-
quences:
s21s
<DNo>
s
<telephone number>
r
Configures immediate call diversion for
the telephone number entered to the
destination number <DNo>.
s61s
<DNo>
s
<telephone number>
r
Configures delayed call diversion (after
20 seconds) for the telephone number
entered to the destination number <DNo>.
s67s
<DNo>
s
<telephone number>
r
Configures call diversion on busy for the
telephone number entered to the desti-
nation number <DNo>.
Q
Wait for the second-long positive ac-
knowledgement tone.
O
Hang up the receiver.
Page 135 / 180
Setting Up Call Diversion
135
Setting Up Call Diversion for the Analog Extension FON 1
Disabling Call Diversion for a Certain Telephone Number
N
Pick up the handset.
Enter one of the following three key se-
quences:
s21ss
<telephone
number>
r
Disables immediate call diversion.
s61ss
<telephone
number>
r
Disables delayed call diversion.
s67ss
<telephone
number>
r
Disables a call diversion on busy.
Q
Wait for the second-long positive ac-
knowledgement tone.
O
Hang up the receiver.
For the destination number, enter a complete fixed-line or In-
ternet telephone number. Internet telephone numbers may
not contain letters or special characters.
Setting up Call Diversion for an Analog Extension
N
Pick up the handset.
Define the kind of call diversion:
r41
Call diversion immediately without ring-
ing
r45
Call diversion immediately with ringing
r42
Call diversion delayed (after 20 seconds)
r43
Call diversion on busy
r44
Call diversion delayed (after 20 seconds)
or on busy
Enter the destination to which the call
will be diverted:
1
s
<DNo>
s
Configures call diversion to the destina-
tion number <DNo>.
r91ss
Save your settings.
O
Hang up the receiver.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top