Page 6 / 38
Scroll up to view Page 1 - 5
Page 7 / 38
I
Operation Safety Rules
High optical power can cause bodily harm, especially to eyes.
Never look directly into the end of the optical transmitter fiber
jumper or the end of its active connector.
Exercise care if you must bend fibers. If bends are necessary,
the fiber bending radius should never be less than 38mm.
Power socket overload, broken cables or broken plugs may
cause electric shock or fire. Regular check-ups on power
supply wires and cables are essential. If any appears
damaged, replace it at once.
Use the power supply adapter provided in the package only.
Using other adapters may cause equipment damages or
operation failures.
Install the equipment in ventilated environment without high
temperatures or direct sunlight to protect the equipment and
its components from overheating, which can result in
damages.
Page 8 / 38
II
Avoid moisture, dampness and water damage. Equipment
exposed to water cannot work normally and can be extremely
hazardous due to shorting.
Do not lay this equipment on an unsteady base.
Page 9 / 38
III
Packing List
After opening the packing case of the AN5506-04-A, please check
whether the accompanied articles are in the packing case according to
the packing list as below:
Item
Quantity
Remarks
AN5506-04-A
1
-
Certificate of quality
1
-
User manual
1
AN5506-04-A GPON Optical Network
Unit User Manual
DC power adapter with two
pins
1
DC power adapter with two pins for the
AN5506-04-A
RJ45 connector
5
-
19216811.live