Page 61 / 73
Scroll up to view Page 56 - 60
57
Unlimited Priority Queue:
The LAN IP address will not be bounded in the QoS limitation.
High/Low Priority Queue:
This can put the packets in the protocol and port range to
High/Low QoS Queue.
Bandwidth Allocation:
This can reserve / limit the throughput of specific protocols and port range. You can
set the upper bound and Lower bound.
Type:
Specify the direction of packets. Upload or download.
IP range:
Specify the IP address range. You could also fill one IP address
Protocol:
Specify the packet type. The default ALL will put all packets in the QoS priority
Queue.
Port range:
Specify the Port range. You could also fill one Port.
Page 62 / 73
58
Policy:
Specify the policy the QoS,
Min
option will reserve the selected data rate in QoS
queue.
Max
option will limit the selected data rate in QoS queue.
Rate:
The data rate of QoS queue.
Disabled:
This could turn off QoS feature.
8.8. Routing
You can set enable Static Routing to let the router forward packets by your routing policy.
Destination LAN IP:
Specify the destination LAN IP address of static routing rule.
Subnet Mask:
Specify the Subnet Mask of static routing rule.
Default Gateway:
Specify the default gateway of static routing rule.
Hops:
Specify the Max Hops number of static routing rule.
Interface:
Specify the Interface of static routing rule.
Page 63 / 73
59
9. TOOLS
9.1. Admin
You can change the password required to log into the broadband router's system
web-based management. By default, the password is: admin. Passwords can contain 0 to
12 alphanumeric characters, and are case sensitive.
Current Password:
Fill in the current password to allow changing to a new password.
New Password:
Enter your new password and type it again in
Repeat New Password
for
verification purposes
Remote managemen
t
This allows you to designate a host in the Internet the ability to configure the
Broadband router from a remote site. Enter the designated host IP Address in the
Host IP Address field.
Host Address:
This is the IP address of the host in the Internet that will have
management/configuration access to the Broadband router from a remote site. If the
Host Address is left 0.0.0.0 this means anyone can access the router’s web-based
configuration from a remote location, providing they know the password.
Port:
The port number of the remote management web interface.
Enabled:
Check to enable the remote management function.
Click <
Apply
> at the bottom of the screen to save the above configurations.
Page 64 / 73
60
9.2. Time
The Time Zone allows your router to reference or base its time on the settings configured
here, which will affect functions such as Log entries and Firewall settings.
Time Zone:
Select the time zone of the country you are currently in. The router will set its
time based on your selection.
NTP Time Server:
The router can set up external NTP Time Server.
Daylight Savings:
The router can also take Daylight Savings into account. If you wish to
use this function, you must select the Daylight Savings Time period and check/tick
the enable box to enable your daylight saving configuration.
Click
<Apply>
at the bottom of the screen to save the above configurations.
Page 65 / 73
61
9.3. DDNS
DDNS allows you to map the static domain name to a dynamic IP address. You must get
an account, password and your static domain name from the DDNS service providers. This
router supports DynDNS, TZO and other common DDNS service providers.
Enable/Disable DDNS:
Enable or disable the DDNS function of this router
Server Address:
Select a DDNS service provider
Host
Name:
Fill in your static domain name that uses DDNS.
Username:
The account that your DDNS service provider assigned to you.
Password:
The password you set for the DDNS service account above
Click
<Apply>
at the bottom of the screen to save the above configurations.
19216811.live