Page 91 / 135
Scroll up to view Page 86 - 90
91
Obtain A DNS Server Address Automatically
Enable or disable obtaining a DNS server automatically.
Primary IPv6 DNS Address
Enter the primary IPv6 DNS address.
Secondary IPv6 DNS Address
Enter the secondary IPv6 DNS address.
Enable DHCP-PD
Enable or disable DHCP-prefix delegation (PD).
LAN IPv6 Address
Enter the LAN IPv6 address.
LAN IPv6 Link-Local Address
Enter the LAN IPv6 link-local address.
Enable Automatic IPv6 Address Assignment
Enable or disable automatic IPv6 address assignment.
Autoconfiguration Type
Enter the autoconfiguration type. (Default: SLAAC+RDNSS)
Router Advertisement Lifetime
Enter the IPv6 Address Lifetime (in minutes).
Click
Apply
to save the settings or
Cancel
to discard changes.
Page 92 / 135
92
Configuring 6to4
To view the 6to4 settings, click
IPv6
then select
6to4
.
6to4 Address
Enter the 6to4 IP address.
Primary IPv6 DNS Address
Enter the primary IPv6 DNS address.
Secondary IPv6 DNS Address
Enter the secondary IPv6 DNS address.
LAN IPv6 Address
Enter the LAN IPv6 address.
LAN IPv6 Link-Local Address
Enter the LAN IPv6 link-local address.
Enable Automatic IPv6 Address Assignment
Enable or disable automatic IPv6 address
assignment.
Autoconfiguration Type
Enter the autoconfiguration type. (Default: SLAAC+RDNSS)
Router Advertisement Lifetime
Enter the IPv6 Address Lifetime (in minutes).
Click
Apply
to save the settings or
Cancel
to discard changes.
Page 93 / 135
93
Viewing Local Connections
To view the Link Local settings, click
IPv6
then select
Link Local
.
LAN IPv6 Link-Local Address
Enter the LAN IPv6 link-local address.
Click
Apply
to save the settings or
Cancel
to discard changes.
Page 94 / 135
94
Firewall Setup
Configuring Basic Settings
To view the Basic settings, click Firewall then select Basic.
The ESR Series Router firewall automatically detects and blocks Denial of Service (DoS) attacks. URL blocking, packet filtering and
stateful packet inspection (SPI) are also supported. The details of the attack and the timestamp are recorded in the security log.
Firewall
Enable or disable the firewall of the ESR Series Router.
Click
Apply
to save the settings or
Cancel
to discard changes.
Note:
This section applies to Client Router mode.
Page 95 / 135
95
Configuring Advanced Settings
The router supports VPN pass-through which allows virtual private networking (VPN) packets to pass through the firewall.
To view the Advanced settings, click Firewall then select Advanced.
VPN L2TP Pass-through
Click Select to allow an L2TP connection method
over a VPN.
VPN PPTP Pass-through
Click Select to allow a PPTP connection method
over a VPN.
VPN IPSec Pass-through
Click Select to allow an IPSec connection method over a VPN.
IPv6 Pass-through
Click Select to allow IPv6 packets to pass through the firewall.
PPPoE Pass-through
Click Select to allow a PPPoE packets to pass through the firewall.
Click
Apply
to save the settings or
Cancel
to discard changes.
Note:
VPN L2TP Pass-through, VPN PPTP Pass-through, and
VPN IPSec Pass-through are enabled by factory default.
19216811.live