Page 11 / 62 Scroll up to view Page 6 - 10
HARDWARE INSTALLATION
Front Panel
The figure below shows the front panel of ENCORE 802.11n Wireless Router.
SYSTEM
(i icon)
This indicator blinking green means the WLAN Router is working successfully.
Otherwise, this indicator always on or off means the function of the WLAN Router
has failed.
WAN (Link/ACT)
(Globe icon)
The indicators light green when the WAN port is connected to a xDSL/Cable
modem successfully.
The indicators blink green while the WAN port was transmitting or receiving data
from the xDSL/Cable modem.
WLAN (ACT)
(Antenna icon)
This indicator lights green when there are wireless devices connected and
transmitting data to the WLAN Router.
LAN (Link/ACT)
These indicators light green when the LAN ports were connected successfully.
These indicators blinking green while the LAN ports were accessing data.
5
Page 12 / 62
Rear Panel
The figure below shows the rear panel of ENCORE 802.11n Wireless Router.
Antenna
There is two 2dBi gain antennas on the rear panel for wireless connection.
LAN (1-4)
Four RJ-45 10/100Mbps Auto-MDIX ports for connecting to either 10Mbps or
100Mbps Ethernet connections.
WAN
In the four port broadband Router, there is an RJ-45 10/100Mbps Auto-MDIX port
for the WAN that connects to the xDSL/Cable modem for Internet connectivity.
POWER
Plug the power adapter to this power jack
RESET
Use a pin-shaped item to push to reset this device to factory default settings. It will
be a useful tool when the manager forgot the password to login, and needs to
restore the device back to default settings.
Side Panel
The figure below shows the side panel of ENCORE 802.11n Wireless Router.
Side Panel
WPS
Push this button to execute the Wi-Fi Protected Setup process.
- 6 -
Page 13 / 62
Hardware connections
Connecting the WLAN Router
1.
Plug in one end of the network cable to the WAN port of the WLAN Router.
2.
Plug in the other end of the network cable to the Ethernet port of the xDSL or
Cable modem.
3.
Use another network cable to connect to the Ethernet card on the computer
system; the other end of the cable connects to the LAN port of the WLAN
Router. Since ENCORE 802.11n Wireless Router has four ports, you can
connect up to four computers directly to the unit. Then you do not have to buy a
switch to connect these computers since one WLAN Router functions both as a
connection-sharing unit and as a switch.
Check the installation
The control LEDs of the WLAN Router are clearly visible and the status of the
network link can be seen instantly:
1.
With the power source on, once the device is connected to the broadband modem,
the Power, System, LAN, WLAN and WAN port LEDs of the WLAN Router
will light up indicating a normal status.
2.
When the WAN Port is connected to the ADSL/Cable modem, the WAN LED
will light up.
3.
When the LAN Port is connected to the computer system, the LAN LED will
light up.
- 7 -
Page 14 / 62
PC NETWORK TCP/IP SETTING
The network TCP/IP settings differ based on the computer’s operating system
(Win95/98/ME/NT/2000/XP) and are as follows.
Windows 95/98/ME
1.
Click on the “
Network neighborhood
” icon found on the desktop.
2.
Click the right mouse button and a context menu will be show.
3.
Select “
Properties
” to enter the TCP/IP setting screen.
4.
Select “
Obtain an IP address automatically
” on the “
IP address
” field.
5.
Select “
Disable DNS
” in the “
DNS
” field.
8
Page 15 / 62
6.
Select “
None
” for the “
Gateway address
” field.
Windows 2000
Double click on the “
My Computer
” icon on the desktop. When “
My Computer
window opens, open the “
Control Panel
” and then open the “
Network dialup
connection
” applet. Double click on the “Local area network connection” icon.
Select “Properties” to enter the TCP/IP setting window.
1.
In the “
Local area network status
” window, click on “
Properties
.”
2.
In the “
Local area network connection
” window, first select TCP/IP setting
and then select “
Properties
.”
3.
Set both “
IP address
” and “
DNS
” to
Automatic configuration
.
- 9 -

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top