Page 71 / 75 Scroll up to view Page 66 - 70
65
Configuration
This function enables users to save settings as a profile and load profiles for different
circumstances. User can also load the factory default settings, and run a setup wizard to
configure the WLAN Router and Router interface.
Figure 70
UPnP
This function enables users to enable or disable the UPnP function on the WLAN Router.
Page 72 / 75
66
Figure 71
UPnP:
Select to enable or disable the UPnP function on the WLAN Router.
Ping Test
The ping test enables users to determine whether an IP address or host is present on the Internet.
Type the host name or IP address in the text box and click Ping button to start the Ping test.
Page 73 / 75
67
Figure 72
Page 74 / 75
68
Remote Management
This function enables users to set up remote management. Using remote management, the
WLAN Router can be configured through the WAN via a Web browser. A user name and
password are required to perform remote management.
Figure 73
HTTP:
Enable / Disable users HTTP access for remote management.
Remote IP Range:
Type a range of IP addresses that can be pinged from remote locations
Gaming mode:
If the user is experiencing difficulties when playing online games or any
applications that uses voice data, enabling the Gaming Mode may help to enhance the
operations. When not playing online games or using a voice application program, the “Gaming
Mode” should be disable.
PPTP:
Enable / Disable users PPTP access for remote management.
IPSec:
Enables / Disable users IPSec access for remote management.
IDENT:
Default is stealth.
If “Stealth” is selected, the router is set to “Port 113” stealth.
Page 75 / 75
69
TECHNICAL SPECIFICATIONS
General
Standards
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.11g; IEEE 802.11b
Protocol
CSMA/CD
Radio Technology
802.11b: Direct Sequence Spread Spectrum (DSSS)
802.11g: Orthogonal Frequency Division Multiplexing (OFDM)
Data Transfer Rate
802.11b: 1, 2, 5.5, 11Mbps (auto sense)
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps(auto sense)
Ethernet: 10Mbps (half duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half duplex), 200Mbps (full- duplex)
Topology
Star
Receiver Sensitivity
54Mbps: Typical -70dBm @ 10% PER (Packet Error Rate)
11Mbps: Typical -85dBm @ 8% PER (Packet Error Rate)
TX Power
18dBm typically @ 802.11b /802.11g
Network Cables
10BASE-T: 2-pair UTP Cat. 3,4,5 (100 m), EIA/TIA- 568 100-ohm
STP (100 m)
100BASE-TX: 2-pair UTP Cat. 5 (100 m), EIA/TIA-568 100-ohm
STP (100 m)
Frequency Range
2400 ~ 2483.5 MHz ISM band
Modulation
Schemes
DBPSK/DQPSK/CCK/OFDM
Security
64/128-bits WEP Encryption; WPA, WPA-PSK, WPA2, WPA2-PSK
Channels
1 ~ 11 Channel (FCC/NCC); 1 ~ 13 Channel (ETSI);
1 ~ 14 Channel (MKK)
Number of Ports
LAN: 4 x 10/100Mbps Auto-MDIX Fast Ethernet port
WAN: 1 x 10/100Mbps Auto-MDIX Fast Ethernet port
Physical and Environmental
DC inputs
7.5V DC / 1A
Power Consumption
5 W (Max)
Temperature
Operating: 0
O
~ 40
O
C, Storage: -10
O
~ 70
O
C
Humidity
Operating: 10% ~ 90%, Storage: 5% ~ 90%
Dimensions
147 x 115 x 35 mm (W x H x D) without Antenna
EMI:
FCC Class B, CE Mark B

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top