Page 46 / 75
Scroll up to view Page 41 - 45
40
WPA-PSK / WPA2-PSK
Figure 43
Figure 44
If WPA or WPA2
PSK
is selected, the above screen is shown.
Encryption Type:
Select the encryption type for TKIP or AES encryption.
Passphrase:
The length should be 8 characters at least.
Page 47 / 75
41
WPA / WPA2
Figure 45
Figure 46
If WPA or WPA2
EAP
is selected, the above screen is shown.
Please set the length of the
encryption key and the parameters for the RADIUS server.
Encryption Type:
Select the encryption type for TKIP or AES encryption.
RADIUS Server:
1.
Enter the IP address, Port used and Shared Secret by the Primary RADIUS Server.
2.
Enter the IP address, Port used and Shared Secret by the Secondary RADIUS Server.
(optional)
Page 48 / 75
42
Advanced
This function enables user to configure advanced wireless functions.
Figure 47
Beacon Interval:
Type the beacon interval in the text box. User can specify a value from 20 to
1000. The default beacon interval is 100.
RTS Threshold:
Type the RTS (Request-To-Send) threshold in the text box. This value
stabilizes data flow. If data flow is irregular, choose values between 256 and 2346 until data
flow is normalized.
Fragmentation Threshold:
Type the fragmentation threshold in the text box. If packet transfer
error rates are high, choose values between 1500 and 2346 until packet transfer rates are
minimized. (NOTE: set this fragmentation threshold value may diminish system performance.)
DTIM Interval:
Type a DTIM (Delivery Traffic Indication Message) interval in the text box.
User can specify a value between 1 and 255. The default value is 1.
TX Rates:
Select one of the wireless communications transfer rates, measured in megabytes
per second, based upon the speed of wireless adapters connected to the WLAN.
Page 49 / 75
43
LAN Settings
The function enables user to configure the LAN port IP address & DHCP Server.
Basic
This page leads to set LAN port properties, such as the host name, IP address, and subnet mask.
Figure 48
Host Name:
Type the host name in the text box. The host name is required by some ISPs. The
default host name is "Wireless Router"
IP Address:
This is the IP address of the router. The default IP address is
192.168.1.1.
Subnet Mask:
Type the subnet mask for the router in the text box. The default subnet mask is
255.255.255.0.
Page 50 / 75
44
DHCP Settings
Figure 49
DHCP Server:
Enables the DHCP server to allow the router to automatically assign IP
addresses to devices connecting to the LAN. DHCP is enabled by default.
DHCP Server Start IP:
Type an IP address to serve as the start of the IP range that DHCP will
use to assign IP addresses to all LAN devices connected to the router.
DHCP Server End IP:
Type an IP address to serve as the end of the IP range that DHCP will
use to assign IP addresses to all LAN devices connected to the router.
Lease Time:
The lease time specifies the amount of connection time a network user be
allowed with their current dynamic IP address.
Add Static DHCP:
Selected
Enable the Static DHCP allows you to assign a static IP address to
the PC that has the IP address and MAC address mapping set in the Static DHCP List.
Static DHCP List:
The static DHCP mapping will list in the table, providing the Host Name,
MAC Address and IP Address.
Dynamic DHCP List:
All dynamic DHCP client computers are listed in the table and
providing the Host name, IP address, and MAC address and Expired Time of the client.
19216811.live