1. Home
    2. /
  2. Manuals
    3. /
  3. Eminent
    4. /
  4. EM4544
    5. /
  5. 7
Page 31 / 248 Scroll up to view Page 26 - 30
2
|
ENGLISH
EM4543 / EM4544 / EM4571- Wireless Router,
Access Point and Signal Booster
Table of contents
1.0 Introduction
...........................................................................................................
3
1.1 Packing contents
...............................................................................................
3
2.0 Using the installation wizard
..................................................................................
3
3.0 Manually configure as wireless router
....................................................................
4
3.1 Connecting the router
........................................................................................
4
3.2 Configuring the router for connection with the Internet
.......................................
4
3.3 Determining the connection method
..................................................................
5
3.3.1 Configuring the router for a DHCP Internet connection
...................................
5
3.3.2 Configuring the router for a Static Internet connection
....................................
6
3.3.3 Configuring the router for a PPPoE Internet connection
..................................
6
3.4 Securing a wireless network
..............................................................................
7
3.4.1 WPA2 AES security (recommended)
..............................................................
7
3.4.2 WEP security
..................................................................................................
8
3.5 Finishing the installation procedure of your wireless router
................................
8
4.0 Setting up a secured connection using WPS
.........................................................
9
4.1 Using the WPS button (Router and Wireless WPS adapter)
..............................
9
5.0 Manual configuration as an Access Point
............................................................
10
5.1 Connecting the router
......................................................................................
11
5.2 Configuring the router as an Access Point
.......................................................
11
5.3 Securing a wireless network
............................................................................
12
5.3.1 WPA2 AES security (recommended)
............................................................
13
5.3.2 WEP security
................................................................................................
13
5.4 Finishing the installation procedure of your Access Point
.................................
14
6.0 Configuring the router as a signal booster (WDS)
................................................
14
6.1 Connecting the signal booster (2)
....................................................................
15
6.2 Configuring the signal booster (2)
....................................................................
15
6.3 Securing your signal booster (2) (WPA2 AES)
.................................................
16
6.4 Configuring your wireless router (1)
.................................................................
17
6.5 Connecting your wireless router with the signal booster (2)
.............................
18
6.6 Completing the installation of the signal booster
..............................................
18
7.0 Configuring the router as a signal booster (Wireless Multi Bridge)
.......................
19
7.1 Connecting the signal booster
.........................................................................
19
7.2.Configuring the local wireless network on the signal booster
...........................
20
7.3 Configuring the Wireless Multi Bridge settings
.................................................
20
8.0 Configuring the wireless network on your computer
.............................................
21
8.1 Configuring a wireless network using Windows XP
..........................................
21
8.2 Configuring a wireless network using Windows Vista/7
....................................
22
9.0 Firewall settings
...................................................................................................
22
9.1 Port Forwarding
...............................................................................................
23
9.2 URL filtering
.....................................................................................................
23
Page 32 / 248
3
|
ENGLISH
10.0 Frequently Asked Questions and other related information
................................
24
11.0 Service and support
...........................................................................................
24
12.0 Warning and points of attention
.........................................................................
25
13.0 Warranty conditions
...........................................................................................
25
14.0 Declaration of Conformity
..................................................................................
27
1.0 Introduction
Congratulations with the purchase of this high-quality Eminent product! This product
has undergone extensive testing by Eminent’s technical experts. Should you
experience any problems with this product, you are covered by a five-year Eminent
warranty. Please keep this manual and the receipt in a safe place.
Register your product now on www.eminent-online.com and receive product updates!
1.1 Packing contents
The following parts need to be present in the packing:
•
EM4543 / EM4544 / EM4571 Wireless router, Access Point and signal booster
•
Power adapter
•
UTP network cable
•
CD-ROM with installation wizard and manuals
•
User manual
2.0 Using the installation wizard
The easiest way to install the router is with the help of the installation wizard. In case
you do not want to use the wizard on the enclosed CD-ROM, you can install the
device as a wireless router (chapter 3), an Access Point (chapter 5) or a signal
booster (chapter 6 & 7) manually.
1.
Turn on your computer.
2.
Place the CD-ROM in the CD-ROM or DVD drive of your computer.
3.
The wizard will automatically start.
4.
Follow the instructions on your screen until the installation has been finished. You
now have a working Internet connection.
Note! The CD-ROM does not allow you to configure the router as a signal booster.
Would you like to install the router as a signal booster? Then continue with chapter 6
or 7.
Page 33 / 248
4
|
ENGLISH
3.0 Manually configure as wireless router
Install the device as a wireless router if you have a cable modem or ADSL modem
without a router function. Make sure that your Internet browser and your network are
correctly configured when configuring the wireless router manually. You can assume
that the settings are correct, unless you have changed any of the settings in the past.
Example of EM4543/EM4544/EM4571 as wireless router
3.1 Connecting the router
1.
Turn off your computer.
2.
Connect the router to a wall outlet using the supplied power adapter.
3.
Connect the supplied UTP network cable to the ‘WAN’ port of the router.
4.
Connect the other end of the UTP network cable to the ‘LAN’ port of your cable
modem.
5.
Connect a UTP network cable to one of the four ‘LAN’ ports of your router.
6.
Connect the other end of the UTP network cable to the network adapter in your
computer.
Do I have a proper network connection? Turn on the computer and verify if the LED on
the router, corresponding with the LAN-port to which you connected the UTP
networking cable, is lit. The LED on the network adapter of your computer should also
be lit.
3.2 Configuring the router for connection with the Internet
Before you can configure the router for a connection with the Internet, you will first
need to connect to the router. Follow the instructions below to connect to the router.
1.
Turn on your computer.
2.
Open your Internet browser (e.g. Internet Explorer or Firefox).
Page 34 / 248
5
|
ENGLISH
3.
Type ‘http://192.168.8.1’ in the address bar.
4.
Press the enter key or click ‘Go to’.
5.
A new screen with three different icons appears. These icons are named ‘Setup
Tool’, ‘Internet Wizard’ and the ‘Wireless Wizard’.
6.
Click ‘Internet Wizard’.
7.
You will now be asked for a ‘Username’ and a ‘Password’. Fill out ‘admin’ in the
‘Username’ field and ‘admin’ in the ‘Password’ field and press the enter key.
8.
Continue with chapter 3.3.
Hint: Click ‘Wireless Wizard’ if you want to setup the wireless network connection. If
you have selected ‘Wireless Wizard’ you can continue with chapter 3.4.
3.3 Determining the connection method
To quickly configure the router for a connection to the Internet through your provider
you will first need to determine which connection method your provider is using
(‘DHCP’, ‘Static IP’, or ‘PPPoE’ ). Consult the information you received from your
provider or look at table 1.
Internet provider
Connection method
Caiway
DHCP
Compuserve with Sagem ADSL modem
DHCP
KPN ADSL with Thomson Speedtouch 546(i) ADSL modem
DHCP
OnsBrabantnet
DHCP+MAC Address
Telfort with Zyxel modem
DHCP
Tiscali with Zyxel or Sagem modem
DHCP
UPC Chello
DHCP+MAC Addres
Ziggo
DHCP+MAC Addres
Belgian providers
Connection method
Telenet with Motorola modem
DHCP
Table 1.
3.3.1 Configuring the router for a DHCP Internet
connection
For an internet connection using ‘DHCP’ you can use the following steps.
1.
Click ‘Internet Wizard’.
2.
Select ‘Manual Internet Configuration’.
3.
Click ‘Next’.
4.
Select ‘DHCP Method’.
Page 35 / 248
6
|
ENGLISH
5.
Click ‘Next’.
6.
Click ‘Next’.
7.
Click ‘Save’ and ‘Close’.
8.
The wizard will now save the settings en will close the screen automatically.
9.
You now have a working internet connection.
In order to prevent losing your password, write down the altered password below:
Password:____________________________________________________________
3.3.2 Configuring the router for a Static Internet
connection
If your provider requires you to make a connection by using a Static IP-address, then
use the following steps. (e.g. Speedtouch Home).
1.
Click ‘Internet Wizard’.
2.
Select ‘Manual Internet Configuration’.
3.
Click ‘Next’.
4.
Select ‘Static IP’.
5.
Click ‘Next’.
6.
Fill in the data as provided by your Internet Service Provider.
7.
Click ‘Next’.
8.
Click Save and Close’.
9.
The wizard will now save the settings and will close the screen automatically.
10.
You now have a working internet connection.
3.3.3 Configuring the router for a PPPoE Internet
connection
If your provider requires you to make a connection by using PPPoE (with username
and password), then use the following steps.
1.
Click ‘Internet Wizard’.
2.
Select ‘Manual Internet Configuration’.
3.
Click ‘Next’.
4.
Select ‘PPPoE’.
5.
Click ‘Next’.
6.
Fill in the data as provided by your Internet Service Provider.
7.
Click ‘Next’.
8.
Click ‘Save and Close’.
9.
The wizard will now save the settings and will close the screen automatically.

Rate

4 / 5 based on 1 vote.

Popular Eminent Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top