Page 171 / 190 Scroll up to view Page 166 - 170
The descriptions of every setup item are listed below:
Item Name
Description
Ping of Death
Set the threshold of when this DoS prevention
mechanism will be activated. Please check the
box of Ping of Death, and input the frequency
of threshold (how many packets per second,
minute, or hour), you can also input the ‘Burst’
value, which means when this number of ‘Ping
of Death’ packet is received in very short time,
this DoS prevention mechanism will be
activated.
Discard Ping From
WAN
Check the box to activate this DoS prevention
mechanism.
Port Scan
Many kind of port scan methods are listed
here, please check one or more DoS attack
methods you want to prevent.
Sync Flood
Like Ping of Death, you can set the threshold of
when this DoS prevention mechanism will be
Page 172 / 190
activated.
When you finished with the settings in this page, you can click ‘Apply’ button to save
changes you made in this page, or you can click ‘Cancel’ to discard changes. After you click
‘Apply’ button, you’ll see the following message:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 30 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.
Page 173 / 190
3
6
4 Parental Control
For those families who have children in the house, parental control is a very useful function
for parents: If parents are not at home, child will not be able to access Internet so their
Internet usage can be monitored by parents.
To enable parental control function, check ‘Enable Parental Control’ box. If this function is
enabled, this broadband router will check parent computer’s presence before allowing
other computers to access Internet. By default, your PC’s MAC address will be listed here
automatically. If you’re adding other PC’s MAC address, you can input it manually in ‘MAC
Address of Parental PC’ box.
Please note you don’t need to add : or
in MAC address, just input 12 hexadecimal numbers
(like shown above).
You can also setup a time
based parental control by schedule function:
Page 174 / 190
The descriptions of every setup item are listed below:
Item Name
Description
MAC
Input computer’s MAC address which will be
controlled by parental control. You can input
the MAC address manually in ‘MAC’ box, or
select a computer’s MAC address in ‘Select’
dropdown list, then click << button.
Please note that only active (connected to LAN
port of this broadband router and switched on)
computer’s MAC address will be listed here. If
you think some computer’s MAC address
doesn’t appear, you can select ‘Refresh’ and
this broadband router will rescan for all
computers on LAN again.
Weekdays
Select weekdays which will be affect by this
parental control rule.
Time Start /
Time Stop
Select starting / ending time this parental
control rule will take effect.
Add
Add this parental control rule to the list.
Reset
Clear all inputted texts.
When one or more parental control rule is appear in the list, you can select it/them by
selecting its ‘Select’ box (under ‘Select’), and click ‘Delete’ button to remove it/them from
the list. Click ‘Delete All’ to remove all parental control rules. You can also click ‘Reset’ to
unselect all selected parental control rules. When you finished with the settings in this page,
Page 175 / 190
you can click ‘Apply’ button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the following message:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 30 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top