Page 16 / 139
Scroll up to view Page 11 - 15
12
II
‐
2.
Access Point Mode
1.
Connect the
yellow
LAN port of your BR
‐
6228nS V2/nC V2 to the LAN port
of your existing router using an Ethernet cable, then click “Next”.
2.
Select “Obtain an IP address automatically” or “Use the following IP
address” for your BR
‐
6228nS V2/nC V2. If you are using a static IP, enter
the IP address, subnet mask and default gateway. Click “Next” to proceed
to the next step.
Page 17 / 139
13
“Obtain an IP address automatically” is the recommended setting
for most users. For more guidance on static IP addresses, please
refer to
IV
‐
1. Configuring your IP address
.
3.
Enter a name and password for your wireless network, then click “Next”
to continue.
4.
A summary of your configuration will be displayed, as shown below.
Check that all of the details are correct and then click “Next” to proceed.
Page 18 / 139
14
If you wish to backup the device’s settings, click “Backup this
configuration” to open a new window and save your current
configuration to a AP.txt file.
5.
Please wait a moment until the BR
‐
6228nS V2/nC V2 is ready.
6.
A final congratulations screen will indicate that setup is complete.
Please
close the browser window.
Page 19 / 139
15
7.
The BR
‐
6228nS V2/nC V2 is working and ready for use. You can now
connect to the device’s new SSID. Please refer to
IV
‐
2. Connecting to a
Wi
‐
Fi network
if you require more guidance.
Page 20 / 139
16
II
‐
3.
Range Extender Mode
1.
Please ensure your BR
‐
6228nS V2/nC V2 is within Wi
‐
Fi range of your
existing wireless router. Click “Next” to continue.
2.
The “Wireless Site Survey” page displays all available wireless networks
within range. Select the Wi
‐
Fi network name (SSID) which you wish to
connect to and enter a “Device SSID” (BR
‐
6228nS V2/nC V2’s SSID) and
“Security Key” (existing SSID’s password) if required. Click “Next” to
continue.
If the Wi
‐
Fi network you wish to connect to does not appear, try
clicking “Refresh”.
19216811.live