EDIMAX BR6228nS Router Manual PDF (Setup & Configuration Guide)

Page 76 / 139 Scroll up to view Page 71 - 75

72

Private IP

Enter the IP address of the computer on the

local network.

Computer Name

Windows computers on the local network

will be listed here – select a computer from

the list and click << to automatically add the

IP address to the “Private IP” field.

Type

Select the type of connection, “TCP”, “UDP”

or “Both”.

Port Range

Input the starting port number in the left

field, and input the ending port number in

the right field. If you only want to redirect a

single port number, only enter a port

number in the left field.

Comment

Enter a comment for reference or

identification.

Page 77 / 139

73

III

‐

3

‐

8

‐

3.

Virtual Server

This function allows you to set up an internet service on a local computer,

without exposing the local computer to the internet. You can also build

various sets of port redirection, to provide various internet services on

different local computers via a single internet IP address.

Private IP

Specify the IP address of the computer on

your local network.

Computer Name

Select the name of a Windows computer

from the drop

‐

down menu and click

to

auto

‐

input its IP address in the “Private IP”

field.

Private Port

Specify the private port you wish to use on

the computer in your local network.

Type

Select the type of Internet Protocol.

Public Port

Specify a public port to access the computer

on your local network.

Comment

Enter a comment for reference or

identification.

Page 78 / 139

74

III

‐

3

‐

8

‐

4.

2.4GHz Wireless

These settings are for experienced users only. Please do not change any of the

values on this page unless you are already familiar with these functions.

Fragment Threshold

Set the Fragment threshold of the wireless

radio. The default value is 2346.

RTS Threshold

Set the RTS threshold of the wireless radio.

The default value is 2347.

Beacon Interval

Set the beacon interval of the wireless radio.

The default value is 100.

DTIM Period

Set the DTIM period of wireless radio. The

default value is 3.

Data Rate

Set the wireless data transfer rate. The

default is set to auto.

N Data Rate

Set the data rate of 802.11n. The default is

set to auto .

Channel Width

Select wireless channel width (bandwidth

used by wireless signals from the device) –

the recommended value is Auto 20/40MHz.

Preamble Type

Set the wireless radio preamble type. The

default value is “Short Preamble”.

Page 79 / 139

75

CTS Protect

Enabling this setting will reduce the chance

of radio signal collisions between 802.11b

and 802.11g wireless access points. It’s

recommended to set this option to “Auto”.

Tx Power

Set the power output of the wireless radio.

You may not require 100% output power.

Setting a lower power output can enhance

security since potentially malicious/unknown

users in distant areas will not be able to

access your signal.

WMM

WMM (Wi

‐

Fi Multimedia) technology can

improve the performance of certain network

applications, such as audio/video streaming,

network telephony (VoIP) and others. When

WMM is enabled, the device will prioritize

different kinds of data and give higher

priority to applications which require instant

responses for better performance.

III

‐

3

‐

8

‐

5.

ALG

Application Layer Gateway (ALG) is a network security gateway which

supports specific network applications such as gaming and instant messaging.

ALG enables these applications to communicate with their server.

Page 80 / 139

76

III

‐

3

‐

8

‐

6.

IGMP

IGMP is a communications protocol used to establish multicast group

memberships. It allows for a more efficient use of resources and better

performance for applications such as IPTV video streaming.

IGMP Snooping

IGMP snooping monitors traffic between

hosts and multicast routers to facilitate

bandwidth conservation. Select enable or

disable.

IGMP Proxy

IGMP proxy enables intelligent multicast

forwarding based on IGMP snooping

information. Select enable or disable.

It is recommended to set “IGMP Snooping” and “IGMP Proxy” to

“Enable”.

III

‐

3

‐

8

‐

7.

UPnP

Universal plug

‐

and

‐

play (UPnP) is a set of networking protocols which enables

network devices to communicate and automatically establish working

configurations with each other. Select “Enable” or “Disable”.

Rate

Popular EDIMAX Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share