Page 11 / 139
Scroll up to view Page 6 - 10
7
and Ethernet) access for your network devices
.
Range Extender
The device connects wirelessly to your existing
network and repeats the wireless signal.
Follow the appropriate instructions for your operating mode:
Page 12 / 139
8
II
‐
1.
Wi
‐
Fi Router Mode
1.
Connect the
blue
WAN port of your BR
‐
6228nS V2/nC V2 to the LAN port
of your modem using an Ethernet cable, and then click “Next”.
2.
Please wait a moment while the BR
‐
6228nS V2/nC V2 tests the
connection.
Page 13 / 139
9
3.
Click “Next” to continue and configure the device’s wireless network.
4.
Enter a name and password for your wireless network, then click “Next”
to continue.
Page 14 / 139
10
5.
A summary of your configuration will be displayed, as shown below.
Check that all of the details are correct and then click “Next” to proceed.
If you wish to backup the device’s settings, click “Backup this
configuration” to open a new window and save your current
configuration to a router.txt file.
Page 15 / 139
11
6.
Please wait a moment until the device is ready.
7.
A final congratulations screen will indicate that setup is complete.
Please
close the browser window.
8.
The BR
‐
6228nS V2/nC V2 is working and ready for use. You can now
connect to the device’s new SSID. Please refer to
IV
‐
2. Connecting to a
Wi
‐
Fi network
if you require more guidance.
19216811.live