EDIMAX BR6228nC Router Manual PDF (Setup & Configuration Guide)

Page 86 / 139 Scroll up to view Page 81 - 85

82

Save

Click “Save” to save the log on your computer

as .txt file.

Clear

Click “Clear” to clear/erase the existing log.

Refresh

Click “Refresh” to refresh the log and update any

activity.

III

‐

3

‐

9

‐

8.

Active DHCP Client

Information about active DHCP clients is shown in the table, which displays

the DHCP server assigned IP address, MAC address and time expired for

each computer or device on the local network.

III

‐

3

‐

9

‐

9.

Statistics

Displays sent and received packet network statistics.

Page 87 / 139

83

IV.

Appendix

IV

‐

1.

Configuring your IP address

For first time access to the URL

http://Edimax.Setup

please ensure your

computer is set to use a dynamic IP address. This means your computer can

obtain an IP address automatically from a DHCP server. You can check if your

computer is set to use a dynamic IP address by following

IV

‐

1

‐

1. How to check

that your computer uses a dynamic IP address

.

Static IP users

can also temporarily modify your computer’s IP address to be

in the same IP address subnet e.g.

192.168.2.x (x = 3 – 254)

as the BR

‐

6228nS

V2/nC V2 in order to access

http://Edimax.Setup

.

The BR

‐

6228nS V2/nC V2’s default IP address is 192.168.2.1.

The procedure for modifying your IP address varies across different operating

systems; please follow the guide appropriate for your operating system in

IV

‐

1

‐

2. How to modify the IP address of your computer

.

Static IP users please make a note of your static IP before you

change it.

You can assign a new IP address to the device which is within the subnet of

your network during setup or using the browser based configuration interface

(refer to

III

‐

3

‐

4. LAN

). Then you can access the URL

http://Edimax.Setup

in

future without modifying your IP address.

Please remember to change your IP address back to its original

value after the device is properly configured.

Page 88 / 139

84

IV

‐

1

‐

1. How to check that your computer uses a dynamic IP address

Please follow the instructions appropriate for your operating system.

IV

‐

1

‐

1

‐

1.

Windows XP

1.

Click the “Start” button (it should be located in the lower

‐

left corner of

your computer), then click “Control Panel”. Double

‐

click the “Network and

Internet Connections” icon, click “Network Connections”, and then

double

‐

click “Local Area Connection”. The “Local Area Connection Status”

window will then appear, click “Properties”.

2.

“Obtain an IP address automatically” and “Obtain DNS server address

automatically” should be selected.

Page 89 / 139

85

Page 90 / 139

86

IV

‐

1

‐

1

‐

2.

Windows Vista

1.

Click the “Start” button (it should be located in the lower

‐

left corner of

your computer), then click “Control Panel”. Click “View Network Status and

Tasks”, then click “Manage Network Connections”. Right

‐

click “Local Area

Network”, then select “Properties”. The “Local Area Connection Properties”

window will then appear, select “Internet Protocol Version 4 (TCP / IPv4)”,

and then click “Properties”.

2.

Select “Obtain an IP address automatically” and “Obtain DNS server

address automatically” should be selected.

Rate

Popular EDIMAX Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share