Page 81 / 97
Scroll up to view Page 76 - 80
81
Note:
You need to give your LAN PC clients a fixed/static IP
address for DMZ to work properly.
You can now configure other advance sections or start using the router (with the advance settings
in place
Page 82 / 97
82
Chapter 3
Status
The Status section allows you to monitor the current status of your router. You can use the Status
page to monitor: the connection status of the Broadband router's WAN/LAN interfaces, the
current firmware and hardware version numbers, any illegal attempts to access your network, and
information on all DHCP client PCs currently connected to your network.
Parameters
Description
3.1 Status and Information
Shows the router
’
s system information
3.2 Internet Connection
View the Broadband router
’
s current Internet connection status
and other related information
3.3 Device Status
View the Broadband router
’
s current setting status
3.4 System Log
View the Broadband router
’
s system log
3.5 Security Log
View any attempts that have been made to illegally gain access
to your network.
Page 83 / 97
83
3.6 Active DHCP Client
View your LAN client's information that is currently linked to the
Broadband router's DHCP server
3.7 Statistics
Shows the statistics
Select one of the above five Status selections and proceed to the manual
’
s relevant sub-section
3.1 Status and Information
The Status and Information section allows you to view the router
’
s system information
Parameters
Description
Information
You can see the router
’
s system information such as the router
’
s:
LAN MAC Address, WAN MAC Address, Hardware version,
Serial Number, Boot code Version, Runtime code Version
Page 84 / 97
84
3.2 Internet Connection
View the Broadband router
’
s current Internet connection status and other related information
Parameters
Description
Internet Connection
This page displays whether the WAN port is connected to a
Cable/DSL
connection. It also displays the router
’
s WAN port:
WAN IP
address,
Subnet Mask
, and ISP
Gateway
as well as
the
Primary DNS
and
Secondary DNS
being used.
3.3 Device Status
View the Broadband router
’
s current configuration settings. The Device Status displays the
configuration settings you
’
ve configured in the
Quick Setup Wizard/General Setup
section.
Page 85 / 97
85
Parameters
Description
Device Status
This page shows the Broadband router
’
s current device settings.
This page displays the Broadband router LAN port
’
s current LAN
IP Address
and
Subnet Mask
. It also shows whether the
DHCP
Server
function is enabled/disabled..
19216811.live