Page 111 / 167 Scroll up to view Page 106 - 110
107
Save
Click
Save
to save the log on your computer
as .txt file.
Clear
Click
“Clear” to clear/erase the existing log.
Refresh
Click “Refresh” to refresh the log and update any
activity.
III-3-9-8.
Active DHCP Client
Information about active DHCP clients is shown in the table, which displays
the DHCP server assigned IP address, MAC address and time expired for
each computer or device on the local network.
III-3-9-9.
Statistics
Displays sent and received packet network statistics.
Page 112 / 167
108
IV.
Appendix
IV-1.
Configuring your IP address
For first time access to the URL
http://edimax.setup
please ensure your
computer is set to use a dynamic IP address. This means your computer can
obtain an IP address automatically from a DHCP server. You can check if your
computer is set to use a dynamic IP address by following
IV-1-1. How to check
that your computer uses a dynamic IP address
.
Static IP users
can also
temporarily modify your computer’s IP address to be
in the same IP address subnet e.g.
192.168.2.x (x = 3
254)
as the BR-6208AC
in order to access
http://edimax.setup
.
The BR-6208A
C’s default IP address
The procedure for modifying your IP address varies across different operating
systems; please follow the guide appropriate for your operating system in
IV-1-2. How to modify the IP address of your computer
.
Static IP users please make a note of your static IP before you
change it.
You can assign a new IP address to the device which is within the subnet of
your network during setup or using the browser based configuration interface
(refer to
III-3-4. LAN
). Then you can access the URL
http://edimax.setup
in
future without modifying your IP address.
Please remember to change your IP address back to its original
value after the device is properly configured.
Page 113 / 167
109
IV-1-1. How to check that your computer uses a dynamic IP address
Please follow the instructions appropriate for your operating system.
IV-1-1-1.
Windows XP
1.
Click the “Start” button (it should
be located in the lower-left corner of
your computer), then click “Control Panel”. Double
-
click the “Network and
Internet Connections” icon, click “Network Connections”, and then
double-
click “Local Area Connection”. The “Local Area Connection Status”
win
dow will then appear, click “Properties”.
2.
“Obtain an IP address automatically” and “Obtain DNS server address
automatically
” should be selected.
Page 114 / 167
110
Page 115 / 167
111
IV-1-1-2.
Windows Vista
1.
Click the “Start” button (it should be located in the lower
-left corner of
your computer), then click “Control Panel”. Click “View Network Status and
Tasks”, then click “Manage Network Connections”. Right
-
click “Local Area
Network”, then select “Properties”. The “Local Area Connection Properties”
window will then appear, se
lect “Internet Protocol Version 4 (TCP / IPv4)”,
and then click “Properties”.
2.
Select “Obtain an IP address automatically” and “Obtain DNS server
address automaticall
y” should be selected.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top