Page 76 / 167
Scroll up to view Page 71 - 75
72
Multiple SSID
Use the drop down menu to select which SSID
( numbered 1
–
4) to configure.
Wireless Network
Name (SSID)
Enter a reference/ID name to separate your
wireless network.
Enable Multiple
SSID
Check/uncheck this box to enable/disable the
specified SSID. Must be checked for the SSID to
function.
Enable Wireless
Clients Isolation
Check the box to enable wireless clients
isolation. This prevents wireless clients
connected to the BR-6208AC from
communicating with each other and improves
security. Typically, this function is useful for
corporate environments or public hot spots
and can prevent brute force attacks on clients’
usernames and passwords.
Band
Displays the wireless standard used for the
BR-6208
AC’s frequency band:
2.4GHz (B+G+N): Allows 802.11b, 802.11g, and
802.11n wireless clients to connect to the
BR-6208AC.
Channel Number
Channel number for the guest network is the
same as the main SSID and cannot be adjusted
independently.
VLAN ID
Set a VLAN ID for the specified SSID (see
below).
A VLAN is a local area network which maps workstations virtually
instead of physically and allows you to group together or isolate
users from each other. VLAN IDs 0
–
4094 are supported.
Page 77 / 167
73
III-3-5-3.
WPS
Wi-Fi Protected Setup is a simple way to establish connections between WPS
compatible devices. WPS can be activated on compatible devices by pushing a
WPS button on the device or from within the device’s firmware/configuration
interface. When WPS is activated in the correct manner and at the correct
time for two compatible devices, they will automatically connect. PIN code
WPS includes the use of a PIN code between the two devices for verification.
Enable WPS
Check/uncheck this box to enable/disable
WPS.
WPS Status
Displays “Configured” or “unConfigured”
depending on whether WPS and SSID/security
settings for the device have been configured or
not, either manually or using the WPS button.
Self PIN Code
Displays the WPS PIN code of the device.
SSID
Displays the SSID of the device.
Authentication
Mode
Displays the wireless security authentication
mode of the device.
Authentication Key
Displays the wireless security authentication
key.
Configuration
Mode
The configuration mode of the device’s WPS
setting is displayed here. “Registrar” means
the device acts as an access point for a wireless
client to connect to and the wireless client(s)
Page 78 / 167
74
will follow the device’s wireless settings.
Configure via Push
Button
Click “Start PBC” (Push
-Button Configuration)
to activate WPS on the access point. WPS will
be active for 2 minutes.
Configure via Client
PIN Code
Enter the wireless client’s PIN code here and
click “Start PIN” to activate PIN code WPS.
Refer to your wireless client’s documentation if
you are unsure of its PIN code.
III-3-5-4.
Access Control
Access Control is a security feature that can help to prevent unauthorized
users from connecting to your wireless router.
This function allows you to define a list of network devices permitted to
connect to the BR-6208AC. Devices are each identified by their unique MAC
address. If a device which is not on the list of permitted MAC addresses
attempts to connect to the BR-6208AC, it will be denied.
To enable this function, check the box labeled “Enable
Wireless Access
Control”.
Page 79 / 167
75
MAC address
Select a PC name from the drop-down list and
click “>>” to ad
d enter it into the blank field to
the right.
Click “Refresh’ in the drop
-down menu to
refresh the list of available MAC addresses. If
the address you wish to add is not listed, enter
it manually.
Enter a MAC address of computer or network
device manually without dashes or colons e.g.
for MAC address ‘aa
-bb-cc-dd-ee-
ff’
enter
‘
aabbccddeeff
’.
Comment
Enter a comment for reference/identification
consisting of up to 16 alphanumerical
characters.
Add
Click “Add”
to add the MAC address to the
MAC address filtering table.
MAC address entries will be listed in the table as shown below. Select an entry
using the “Select” checkbox.
Delete Selected/
Delete All
Delete selected or all entries from the table.
Page 80 / 167
76
III-3-5-5.
Schedule
The schedule feature allows you to automate the wireless radio to switch
on/off at specified times. Multiple schedules can be configured.
Check/uncheck the box “Enable
Schedule
Settings” to enable/disable the
wireless on/off scheduling function.
The BR-6208AC must remain connected to the Internet and use an
NTP server for the schedule feature to function correctly.
Wireless scheduling can save energy and increase the security of
your network.
1.
Use the checkboxes to select which day(s) to include in the schedule.
2.
Specify a time (hour and minute) for the schedule using the drop-down
menu.
3.
Select which command applies to this schedule from the drop-down menu,
either “Wireless On” or “Wireless Off”.
19216811.live