Page 86 / 92 Scroll up to view Page 81 - 85
86
The following table describes the parameters of this page:
Field
Description
Synchronize
time with
You can choose
NTP Server automatically, PC’s Clock or
Manually.
Time Zone
Choose the time zone in which area you are from the drop-
down list.
Daylight
Saving
You can enable the daylight saving time.
NTP Server
Address
Set the NTP server manually.
5.7.3.
Firmware
Choose
Maintenance
>
Firmware
, the page shown in the following figure
appears.
You can upgrade the firmware of the Router in this page. Make sure the
firmware you want to use is on the local hard drive of the computer. Click on
Browse
to browse the local hard drive and locate the firmware to be used for
upgrade.
Page 87 / 92
87
The following table describes the parameters of this page:
Field
Description
New Firmware
Location
Click
Browse
to select the firmware file.
Romfile Backup
Click
Browse
and select a path to save the configuration
file of the router.
UPGRADE
After selecting the file, click
UPGRADE
to starting
upgrading the file.
5.7.4.
SysRestart
Choose
Maintenance
>
SysRestart
, the page shown in the following figure
appears. You can restart the device with current settings or back to factory
default settings.
The following table describes the parameters of this page:
Field
Description
Current Settings
Restart the router with current settings.
Factory Default
Settings
Restart the router with settings reset back to factory
defaults.
Page 88 / 92
88
5.7.5.
Diagnostics
Choose
Maintenance
>
Diagnositics
, the page shown in the following figure
appears. The page shows the test results for the connectivity of the physical
layer and protocol layer for both LAN and WAN sides.
The following table describes the parameters of this page:
Field
Description
Virtual Circuit
Choose a PVC from the drop down list to test.
Page 89 / 92
89
6.
Trouble Shooting
Question
Answer
Why are all the indicators
off?
Check the connection between the power
adapter and the power socket.
Check whether the power switch is turned on.
Why is the
LAN
indicator
off?
Check the connection between the device and
your PC, hub or switch.
Check the running status of the computer, hub,
or switch.
Why is the
ADSL
indicator off?
Check the connection between the
Line
port of the
device and the wall jack.
Why does Internet access
fail while the ADSL
indicator is on?
Check whether the VPI, VCI, user name and
password are correctly entered.
Why can I not access the
web configuration page
of the DSL router?
Choose
Start
>
Run
from the desktop, and ping
192.168.2.1
(IP address of the DSL router). If the
DSL router is not reachable, check the type of
network cable, the connection between the DSL
router and the PC, and the TCP/IP configuration of
the PC.
How to load the default
settings after incorrect
configuration?
To restore the factory default settings, turn on the
device, and press the reset button for about 3
seconds, and then release it. The default IP address
and the subnet mask of the DSL router are
192.168.2.1
and
255.255.255.0
, respectively.
User/password of super user:
admin/1234
User/password of common user:
user/user
Page 90 / 92
90
EU Declaration of Conformity
English:
This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC, 2009/125/EC.
French:
Cet équipement est conforme aux exigences essentielles et autres dispositions de la
directive 1999/5/CE, 2009/125/CE
Czechian:
Toto zařízení je v souladu se základními požadavky a ostatními příslušnými u
stanoveními
směrnic 1999/5/ES, 2009/125/ES.
Polish:
Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami
określonymi Dyrektywą UE 1999/5/EC, 2009/125/EC
Romanian:
Acest echipament este în conformitate cu cerinţele esenţiale şi alte pr
evederi relevante ale
Directivei 1999/5/CE, 2009/125/CE.
Russian:
Это оборудование соответствует основным требованиям и положениям Директивы
1999/5/EC, 2009/125/EC.
Magyar:
Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelvekne
k
(1999/5/EK, 2009/125/EC)
Türkçe:
Bu cihaz 1999/5/EC, 2009/125/EC direktifleri zorunlu istekler ve diğer hükümlerle ile
uyumludur.
Ukrainian:
Обладнання відповідає вимогам і умовам директиви 1999/5/EC, 2009/125/EC.
Slovakian:
Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc
1999/5/ES, 2009/125/ES.
German:
Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 1999/5/EC, 2009/125/EC.
Spanish:
El presente equipo cumple los requisitos esenciales de la Directiva 1999/5/EC,
2009/125/EC.
Italian:
Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili
della Direttiva 1999/5/CE, 2009/125/CE.
Dutch:
Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen
van richtlijn 1999/5/EC, 2009/125/EC.
Portugese:
Este equipamento cumpre os requesitos essênciais da Directiva 1999/5/EC, 2009/125/EC
Norwegian:
Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv
1999/5/EC, 2009/125/EC.
Swedish:
Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta
bestämmelser i direktiv 1999/5/EG, 2009/125/EG.
Danish:
Dette udstyr er i overensstemmelse med de væ sentligste krav og andre relevante
forordninger i direktiv 1999/5/EC, 2009/125/EC.
Finnish:
Tämä laite täyttää direktiivien 1999/5/EY, 2009/125/EY oleelliset vaatimukset ja muut
asiaankuuluvat määräykset.
--------------------------------------------------------------------------------------------------------
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It should be
handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned
to the supplier for disposal.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top