Page 61 / 80
Scroll up to view Page 56 - 60
53
5.4.5.
DDNS
DDNS allows you to map the static domain name to a dynamic IP address. You
must get an account, password and your static domain name from the DDNS
service providers.
Parameter
Description
Dynamic DNS
Activated or deactivated the DDNS function.
Service Provider
This router supports DynDNS service provider.
My Host Name
Enter the domain name assigned to your router by the
service provider.
E-mail Address
Enter the E-mail address assigned by DDNS service
provider.
Username
Enter your username.
Password
Enter the password you set for the DDNS service.
Wildcard Support
Enable or disable the wildcard to stand for some
characters.
Page 62 / 80
54
5.5.
Maintenance
5.5.1.
Administrator
Parameter
Description
Username
The username of the router is “admin” by default.
New Password
Enter up to 30-digit of the new password.
Confirm Password
Enter the new password again to confirm the setting.
Page 63 / 80
55
5.5.2.
Time Zone
The Time Zone allows your router to set its time; this will affect function such as
System Log.
Parameter
Description
Current Date/Time
Show the current date/time of the router.
Synchronize time with
NTP Server Automatically – Set the time by following
with a NTP Server.
PC’s Clock – Set the time the same as your computer.
Manually – Set the time manually.
Time Zone
Select the time zone of the country you are currently in.
The router will set its time based on your selection.
Daylight Saving
Select this option if it is in daylight savings time.
NTP Server Address
Enter the IP Address of your time server.
Page 64 / 80
56
5.5.3.
Firmware
If you have new firmware for some features update, please upgrade firmware of
the router here.
Parameter
Description
Current Firmware
Version
The current firmware version will be shown here.
New Firmware
Location
Type in the location of the new firmware or click “Browse”
to find it.
New Romfile Location
To restore the backup settings, please type in the
location of the backup file or click “Browse” to find it.
Romfile Backup
To save the current settings as a backup file, please click
“ROMFILE SAVE”. Then please change the file name
and select the location you want to save the file.
Upgrade
Click “Upgrade” to begin the upgrade processes or
backup file restoring processes. After the router is
restarted, the processes are completed. It might take
several minutes, don't power off the router during
upgrading or restoring.
Page 65 / 80
57
5.5.4.
System Restart
In this page, you can restart your router or restore to factory defaults. If you wish
to restart the router using the factory default settings, select “Factory Default
Settings” to reset to factory defaults. You can also click the “Reset” button in the
rear panel of the router over 5 seconds to reset default settings.
5.5.5.
Diagnostics
This page allows you to diagnose the connectivity of the LAN and WAN network.
19216811.live