Page 6 / 10
Scroll up to view Page 1 - 5
c. You should now see a confirmation of the VoIP connection under
‘SIP
Basic Settings’
5. Configuring Wireless (optional)
Things you need to know before you begin:
- By default the RTA1046VW does not have wireless security
setup. We recommend that you follow the steps below to set this us
before you use wireless
- To use wireless be sure that you already have set up your
wireless adapter.
- To begin your wireless setup, you can connect your computer to
your router via Ethernet cable.
a. If you are still logged into your router, click on “Wireless” in the top
menu. If you are not logged in anymore use your browser to go to
192.168.1.1 and login with
admin
as the username and password (by
default)
b. In the Basic settings, please check that you have the below settings.
Please take note of your SSID (wireless network name)
c. Click on
Apply
d. Click on the
Security
menu on the left
6
Page 7 / 10
e. In the ‘Wireless Security’ drop down menu, select “
64-bit WEP
”
Click on
Apply
f. Select the
“Hexadecimal digits”
radial button
g. In the ‘Key 1’ field enter a 10-character key of your choice consisting of
only numbers 0-9 and letters A-F (lower case is ok). This key will be
used when any computer wants to connect to your router. Please
remember this key
7
Page 8 / 10
h. Click on
Apply
i.
To connect using wireless, go to Start -> Control Panel
j.
Double click on ‘Network Connections’
k. Right click on your wireless adapter and go to ‘View Available Wireless
Networks’
l.
Find the SSID (network name) of your router and click on
Connect
.
By default the SSID should start with RTA1046VW
8
Page 9 / 10
m. You will now be prompted to enter your WEP Key.
n. After click on
Connect
o. You should now see your status as
‘Connected’
6. IPTV
Your router is already IPTV ready, there is no need for further
configuration. To use IPTV you must first be registered. Please refer to
www.tpg.com.au/iptv
for further details
7. Change of Password
For security purposes we highly recommend that you change your
password if you are using your default or if you believe your password
security has been compromised.
To change your password, first please visit
. Your new
password will take approximately 10-15 minutes to take effect, after which
you must reconfigure your new password in your router.
To change your password in your router, please follow the following steps:
and press enter
b. Enter
admin
for both the username and password and click on
OK
.
If you have changed the login credential, please enter the current
username and password for your router interface
c. In the Password field, enter your new TPG password
9
Page 10 / 10
d. Click on
Connect
Please Note: ADSL routers will by default be capable of automatic
authentication. This means your router will use your credentials you
have provided to make the Internet connection. Each time your router
is powered on, it will initialize this automated authentication process
after which your router will receive a public IP address
(fixed or
dynamic depending on your plan) and DNS settings from TPG
Support Information
For further assistance, please call TPG Technical
Support on 1300 360 855
Technical Support Opening Hours
Monday to Friday
8am – midnight
Saturday and Sunday
9am – 9pm
Public Holidays
9am – 6pm
10
19216811.live