DrayTek Vigor-2930n Router Manual PDF (Setup & Configuration Guide)

Page 131 / 298 Scroll up to view Page 126 - 130

igor2930 Series User’s Guide

123

3.9.2 VPN Server Wizard

Such wizard is used to configure VPN settings for VPN server. Such wizard will guide to set

the LAN-to-LAN profile for VPN dial in connection (from client to server) step by step.

VPN Server Mode

Selection

Choose the direction for the VPN server.

Site to Site VPN/Remote Dial-in User

– To set a

LAN-to-LAN profile automatically, please choose Site to

Site VPN.

Remote Dial-in User

–You can manage remote access by

maintaining a table of remote user profile, so that users can

be authenticated to dial-in via VPN connection.

Please choose a

LAN-to-LAN Profile

This item is available when you choose

Site to Site VPN

(LAN-to-LAN) as VPN server mode. There are 32 VPN

profiles for users to set.

Page 132 / 298

Vigor2930 Series User’s Guide

124

Please choose a Dial-in

User Accounts

This item is available when you choose Remote Dial-in User

(Teleworker) as VPN server mode. There are 32 VPN

tunnels for users to set.

Allowed Dial-in Type

This item is available after you choose any one of dial-in

user account profiles. Next, you have to select suitable

dial-in type for the VPN server profile. There are several

types provided here (similar to VPN Client Wizard).

Different Dial-in Type will lead to different configuration

page. In addition, adjustable items for each dial-in type will

be changed according to the VPN Server Mode (

Site to Site

VPN

and

Remote Dial-in User

) selected.

Page 133 / 298

igor2930 Series User’s Guide

125

After making the choices for the server profile, please click

configurations based on the selection you made. Here we take the example of choosing

Remote-Dial-in User

as the

VPN Server Mode

.

z

When you check

PPTP/L2TP with IPSec Policy (None)

, you will see the following

graphic:

z

When you check

PPTP/IPSec/L2TP

(three types) or

PPTP/IPSec

(two types) or

L2TP with IPSec Policy (Nice to Have/Must)

, you will see the following graphic:

Page 134 / 298

Vigor2930 Series User’s Guide

126

z

When you check

IPSec

, you will see the following graphic:

Profile Name

Type a name for such profile. The length of the file is

limited to 10 characters.

User Name

This field is used to authenticate for connection when

you select PPTP or L2TP with or without IPSec policy

above.

Password

This field is used to authenticate for connection when

you select PPTP or L2TP with or without IPSec policy

above.

Pre-Shared Key

For IPSec/L2TP IPSec authentication, you have to type a

pre-shared key.

Confirm Pre-Shared Key

Type the pre-shared key again for confirmation.

Digital Signature (X.509)

Check the box of Digital Signature to invoke this

function.

Use the drop down list to choose one of the certificates

for using. You have to configure one certificate at least

previously in

Certificate Management >> Local

Certificate.

Otherwise, the setting you choose here will

not be effective.

Peer IP/VPN Client IP

Type the WAN IP address or VPN client IP address for

the remote client.

Peer ID

Type the ID name for the remote client.

Remote Network IP

Please type one LAN IP address (according to the real

location of the remote host) for building VPN

connection.

Remote Network Mask

Please type the network mask (according to the real

location of the remote host) for building VPN

connection.

Page 135 / 298

igor2930 Series User’s Guide

127

After finishing the configuration, please click

Next.

The confirmation page will be shown as

follows. If there is no problem, you can click one of the radio buttons listed on the page and

click

Finish

to execute the next action.

Go to the VPN Connection

Management

Click this radio button to access

VPN and Remote

Access>>Connection Management

for viewing VPN

Connection status.

Do another VPN Server

Wizard Setup

Click this radio button to set another profile of VPN Server

through VPN Server Wizard.

View more detailed

configuration

Click this radio button to access

VPN and Remote

Access>>LAN to LAN

for viewing detailed configuration.

3.9.3 Remote Access Control

Enable the necessary VPN service as you need. If you intend to run a VPN server inside your

LAN, you should disable the VPN service of Vigor Router to allow VPN tunnel pass through,

as well as the appropriate NAT settings, such as DMZ or open port.

Rate

Popular DrayTek Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share