Page 86 / 298
Scroll up to view Page 81 - 85
Vigor2930 Series User’s Guide
78
Name
Type a name for this profile. Maximum 15 characters are
allowed.
Interface
Choose a proper interface (WAN, LAN or Any).
For example, the
Direction
setting in
Edit Filter Rule
will
ask you specify IP or IP range for WAN or LAN or any IP
address. If you choose LAN as the
Interface
here, and choose
LAN as the direction setting in
Edit Filter Rule
, then all the
IP addresses specified with LAN interface will be opened for
you to choose in
Edit Filter Rule
page.
Address Type
Determine the address type for the IP address.
Select
Single Address
if this object contains one IP address
only.
Select
Range Address
if this object contains several IPs
within a range.
Select
Subnet Address
if this object contains one subnet for
IP address.
Select
Any Address
if this object contains any IP address.
Start IP Address
Type the start IP address for Single Address type.
End IP Address
Type the end IP address if the Range Address type is selected.
Subnet Mask
Type the subnet mask if the Subnet Address type is selected.
Invert Selection
If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
Below is an example of IP objects settings.
Page 87 / 298
igor2930 Series User’s Guide
79
3.5.2 IP Group
This page allows you to bind several IP objects into one IP group.
Set to Factory Default
Clear all profiles.
Click the number under Index column for settings in detail.
Name
Type a name for this profile. Maximum 15 characters are
allowed.
Interface
Choose WAN, LAN or Any to display all the available IP
objects with the specified interface.
Available IP Objects
All the available IP objects with the specified interface chosen
above will be shown in this box.
Selected IP Objects
Click
>>
button to add the selected IP objects in this box.
Page 88 / 298
Vigor2930 Series User’s Guide
80
3.5.3 Service Type Object
You can set up to 96 sets of Service Type Objects with different conditions.
Set to Factory Default
Clear all profiles.
Click the number under Index column for settings in detail.
Name
Type a name for this profile.
Protocol
Specify the protocol(s) which this profile will apply to.
Source/Destination Port
Source Port
and the
Destination Port
column are available
for TCP/UDP protocol. It can be ignored for other protocols.
The filter rule will filter out any port number.
(=)
– when the first and last value are the same, it indicates
one port; when the first and last values are different, it
indicates a range for the port and available for this profile.
Page 89 / 298
igor2930 Series User’s Guide
81
(!=)
– when the first and last value are the same,
it indicates
all the ports except the port defined here; when the first
and
last values are different, it indicates that all the ports
except the range defined here are available for this service
type.
(>)
–
the port number greater than this value is available.
(<)
–
the port number less than this value is available for this
profile.
Below is an example of service type objects settings.
3.5.4 Service Type Group
This page allows you to bind several service types into one group.
Set to Factory Default
Clear all profiles.
Click the number under Index column for settings in detail.
Page 90 / 298
Vigor2930 Series User’s Guide
82
Name
Type a name for this profile.
Available Service Type
Objects
You can add IP objects from IP Objects page. All the
available IP objects will be shown in this box.
Selected Service Type
Objects
Click
>>
button to add the selected IP objects in this box.
3.5.5 Keyword Object
You can set 200 keyword object profiles for choosing as black /white list in
CSM
>>URL
Web Content Filter Profile.
Set to Factory Default
Clear all profiles.
Click the number under Index column for setting in detail.
19216811.live