1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2920
    5. /
  5. 17
Page 81 / 251 Scroll up to view Page 76 - 80
Vigor2920 Series User’s Guide
71
for 15 seconds.
WAN1 Fail
– It means the connection for WAN2 will be
activated when WAN1 is failed.
WAN1 Upload speed exceed XX kbps
– It means the
connection for WAN2 will be activated when WAN1 Upload
speed exceed certain value that you set in this box for 15
seconds.
WAN1 Download speed exceed XX kbps
– It means the
connection for WAN2 will be activated when WAN1
Download speed exceed certain value that you set in this box
for 15 seconds.
4.1.3 Internet Access
For the router supports dual WAN function, the users can set different WAN settings (for
WAN1/WAN2) for Internet Access. Due to different Physical Mode for WAN1 and WAN2,
the Access Mode for these two connections also varies slightly.
Index
It shows the WAN modes that this router supports. WAN1 is the
default WAN interface for accessing into the Internet. WAN2 is the
optional WAN interface for accessing into the Internet when WAN 1
is inactive for some reason.
Display Name
It shows the name of the WAN1/WAN2 that entered in general
setup.
Physical Mode
It shows the physical connection for WAN1 (Ethernet) /WAN2
(Ethernet or 3G USB Modem) according to the real network
connection.
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Page 82 / 251
Vigor2920 Series User’s Guide
72
Access Mode
Use the drop down list to choose a proper access mode. The details
page of that mode will be popped up. If not, click Details Page for
accessing the page to configure the settings.
There are three access modes provided for PPPoE, Static or
Dynamic IP and PPTP/L2TP.
Details Page
This button will open different web page according to the access
mode that you choose in WAN1 or WAN2.
Details Page for PPPoE
To choose PPPoE as the accessing protocol of the internet, please select
PPPoE
from the
Internet Access
menu. The following web page will be shown.
Enable/Disable
Click
Enable
for activating this function. If you click
Disable
, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
ISP Access Setup
Enter your allocated username, password and authentication
parameters according to the information provided by your ISP.
Username
– Type in the username provided by ISP in this field.
Password
– Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup -
You can type in four sets of time
schedule for your request. All the schedules can be set previously in
Application – Schedule
web page and you can use the number that
you have set in that web page.
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Page 83 / 251
Vigor2920 Series User’s Guide
73
WAN Connection
Detection
Such function allows you to verify whether network connection is
alive or not through ARP Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you have to
type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
MTU
It means Max Transmit Unit for packet. The default setting is
1442.
PPP/MP Setup
PPP Authentication
– Select
PAP only
or
PAP or CHAP
for PPP.
If you want to connect to Internet all the time, you can check
Always On
.
Idle Timeout
– Set the timeout for breaking down the Internet after
passing through the time without any action.
IP Address
Assignment Method
(IPCP)
Usually ISP dynamically assigns IP address to you each time you
connect to it and request. In some case, your ISP provides service to
always assign you the same IP address whenever you request. In this
case, you can fill in this IP address in the Fixed IP field. Please
contact your ISP before you want to use this function.
WAN IP Alias
- If you have multiple public IP addresses and would
like to utilize them on the WAN interface, please use WAN IP Alias.
You can set up to 8 public IP addresses other than the current one
you are using. Notice that this setting is available for WAN1 only.
Fixed IP
– Click
Yes
to use this function and type in a fixed IP
address in the box of
Fixed IP Address
.
Default MAC Address
– You can use
Default MAC Address
or
specify another MAC address by typing on the boxes of MAC
Address for the router.
Specify a MAC Address –
Type the MAC address for the router
manually.
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Page 84 / 251
Vigor2920 Series User’s Guide
74
After finishing all the settings here, please click
OK
to activate them.
Details Page for Static or Dynamic IP
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use
Static or Dynamic IP
as the accessing protocol of the internet, please choose
Static or
Dynamic IP
mode from
Internet Access
menu. The following web page will be shown.
Static or Dynamic IP
Click
Enable
for activating this function. If you click
Disable
,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
Keep WAN
Connection
Normally, this function is designed for Dynamic IP environments
because some ISPs will drop connections if there is no traffic
within certain periods of time. Check
Enable PING to keep alive
box to activate this function.
PING to the IP
- If you enable the PING function, please specify
the IP address for the system to PING it for keeping alive.
PING Interval
- Enter the interval for the system to execute the
PING operation.
WAN Connection
Detection
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Page 85 / 251
Vigor2920 Series User’s Guide
75
MTU
It means Max Transmit Unit for packet. The default setting is
1442.
RIP Protocol
Routing Information Protocol is abbreviated as RIP
（
RFC1058
）
specifying how routers exchange routing tables information. Click
Enable RIP
for activating this function.
WAN IP Network
Settings
This group allows you to obtain an IP address automatically and
allows you type in IP address manually.
WAN IP Alias
- If you have multiple public IP addresses and would
like to utilize them on the WAN interface, please use WAN IP Alias.
You can set up to 8 public IP addresses other than the current one
you are using.
Obtain an IP address automatically
– Click this button to obtain
the IP address automatically if you want to use
Dynamic IP
mode.
Router Name
:
Type in the router name provided by ISP.
Domain Name
:
Type in the domain name that you have assigned.
Specify an IP address
– Click this radio button to specify some data
if you want to use
Static IP
mode.
IP Address
:
Type the IP address.
Subnet Mask
:
Type the subnet mask.
Gateway IP Address
:
Type the gateway IP address.
Default MAC Address
: Click this radio button to use default MAC
address for the router.
Specify a MAC Address
: Some Cable service providers specify a
specific MAC address for access authentication. In such cases you
need to click the
Specify a MAC Address
and enter the MAC
address in the MAC Address field.
DNS Server IP
Address
Type in the primary IP address for the router if you want to use
Static IP
mode. If necessary, type in secondary IP address for
necessity in the future.
Details Page for PPTP/L2TP
VoIPon
www.voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top