DrayTek Vigor-2900V Router Manual PDF (Setup & Configuration Guide)

Page 111 / 173 Scroll up to view Page 106 - 110

Vigor2900 Series User’s Guide

105

The major benefit of this mode is that you don’t have to memorize your friend’s IP

address, which might change very frequently if it’s dynamic. Instead of that, you will

only have to using

dial plan

or directly dial your friend’s

account name

if you are with

the same SIP Registrar. Please refer to the

Example 1 and 2 in the Calling Scenario.

z

Peer-to-Peer

Before calling, you have to know your friend’s IP Address. The Vigor VoIP Routers will

build connection between each other. Please refer to the

Example 3 in the Calling

Scenario.

Our Vigor V models firstly apply efficient codecs designed to make the best use of

available bandwidth, but Vigor V models also equip with automatic QoS assurance.

QoS Assurance assists to assign high priority to voice traffic via Internet. You will

always have the required inbound and outbound bandwidth that is prioritized exclusively

for Voice traffic over Internet but you just get your data a little slower and it is tolerable

for data traffic.

Click

VoIP Setup

on the

Advanced Setup

group. You will get the following page:

Page 112 / 173

Vigor2900 Series User’s Guide

106

3.10.1 DialPlan Setup

In this section, you can set your VoIP contacts in the “phonebook” we called DialPlan - help

you to make calls quickly and easily by using “speed-dial”

Phone Number

. There are total 60

index entries in the DialPlan for you to store all your friends and family members’ SIP

addresses.

Click any index number to display the dial plan setup page.

Enable

Click this to enable this entry.

Phone Number

The speed-dial number of this index. This can be any number

you choose, using digits

0-9

and

*

.

Display Name

The Caller-ID that you want to be displayed on your friend’s

screen. This let your friend can easily know who’s calling

without memorizing lots of SIP URL Address.

SIP URL

Enter your friend’s SIP Address.

Example 1:

If Tom gives you a SIP URL as

sip:[email protected]

then you can input the number

just as the previous figure, except you can change any number in the Phone Number field.

Example 2:

If Kevin gives you an IP address 203.69.175.16 only, then you can use keypad on the phone to

dial directly as

#203*69*175*16#

to Kevin without setup any information on your DialPlan.

Page 113 / 173

Vigor2900 Series User’s Guide

107

3.10.2 SIP Related Functions Setup

In this section, you set up your own SIP settings. When you apply for an account, your SIP

service provider will give you an

Account Name

or user name,

SIP Registrar, Proxy,

and

Domain name

. (The last three might be the same in some case). Then you can tell your folks

your SIP Address as in

Account Name@ Domain name

As Vigor VoIP Router is turned on, it will first register with Registrar using

accountname@Domain/Realm. After that, your call will be bypassed by SIP Proxy to the

destination using AccountName@Domain/Realm as identity.

SIP Port

The port number is used to send/receive SIP message for

building a session. While the default value is 5060, you can

change it to other number. However, this situation needs other

party to change simultaneously to the same number.

By the time you can type

:port

number after the domain name to

specify that port as the destination of data transmission (e.g.,

nat.draytel.org

:5065

)

Domain

You can enter domain name or IP address of SIP Registrar

server. For example, iptel.org or 195.37.77.101 is identical. You

have to apply an account of SIP Registrar server before you can

use it. However, it is not necessary to use sip registrar server

function in order to use VoIP function.

Proxy

You can enter IP address of SIP proxy server. For all SIP

messages destined the

Domain

defined above, Vigor router will

send to the

Proxy

and the

Proxy

will forward it.

Outbound Proxy

You can enter IP address of outbound SIP proxy server. For all

SIP messages, Vigor router will send to the

Outbound Proxy

and the will

Outbound Proxy

forward it.

Register via

Select to specify IP address carried in the payload. If you want

to make VoIP call without register personal information, please

Page 114 / 173

Vigor2900 Series User’s Guide

108

choose

None

and check the box to achieve the goal.

Some SIP

server allows user to use VoIP function without registering. For

such server, please check the box of

make call without

register

. Choosing

Auto

is recommended. The system will

select a proper way for your VoIP call.

Display Name

You can enter any string as a display name in this field. This

will be shown on the caller side.

Account Name

You can enter the account name, usually the part of SIP URL

before the character @ provided by your service provider or IP

address for peer-to-peer connection.

Authentication ID

You can enter the authentication ID provided by your service

provider. Enter the name or number used for SIP Authorization

with SIP Registrar.

Password

Enter the password when you use a SIP registrar server that

needs password.

Expire Time

The time duration that SIP registrar server keeps your

registration record. Before the time expired, Vigor will issue

another register message to registrar server again.

Stun server

Check and enter the

IP address of the STUN server if you are

behind a NAT router.

Page 115 / 173

Vigor2900 Series User’s Guide

109

3.10.3 CODEC/RTP/DTMF Setup

The codec used for each call can be negotiated with the peer party before each session.

Mic/Speaker Gain

Adjust the volume of microphone and speaker by entering

number from 1- 10. The larger of the number, the louder the

volume is.

Default Codec

There are five different CODECs you can choose as your prefer

CODEC that you wish to use. However, the real CODEC be

used was negotiate with peer party before session was

established. The default CODEC is G.729A/B; it occupied less

bandwidth while still have good voice quality. It is better for

you to have at least 256Kbps upstream if you would like to use

G.711.

NOTE:

If your upstream speed only supports

64Kbps, do not use G.711 CODEC.

Packet Size

The amount of data contains in a single packets (10, 20, 30, 40,

50 and 60). The default value is 20 ms, it means the data packet

Rate

Popular DrayTek Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share