1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2900V
    5. /
  5. 11
Page 51 / 173 Scroll up to view Page 46 - 50
Vigor2900 Series User’s Guide
45
PPTP Setup
PPTP Link
- Click
Enable
to enable a PPTP client to establish a
tunnel to a DSL modem on the WAN interface.
PPTP Server
- Specify the IP address of the PPTP server.
ISP Access Setup
ISP Name
- Type in the ISP Name provided by ISP in this field.
Username
-Type in the username provided by ISP in this field.
Password
-Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup -
You can type in four sets of time
schedule for your request. All the schedules can be set previously in
Application – Schedule
web page and you can use the number that
you have set in that web page.
ISDN Dial Backup
Setup
This setting is available for the routers supporting ISDN function
only. Before utilizing the ISDN dial backup feature, you must
create a dial backup profile first. Please click
Internet Access
Setup
>
Dialing to a Single ISP
to enter the backup profile.
.
Due to the absence of the ISDN interface in some models (e.g.,
Vigor2900V and Vigor2900VG), the ISDN dial backup feature and
its associated setup options are not available to them. Please refer to
the previous part for further information.
None
- Disable the backup function.
Packet Trigger -
The backup line is not on until a packet from a
local host triggers the router to establish a connection.
Always On
-
If the broadband connection is no longer available, the
backup line will be activated automatically and always on until the
broadband connection is restored. We recommend you to enable this
feature if you host a web server for your customers’ access.
PPP Setup
PPP Authentication
- Select
PAP only
or
PAP or CHAP
for PPP.
Always On
-Check this box if you want the router keeping
connecting to Internet forever.
Page 52 / 173
Vigor2900 Series User’s Guide
46
Idle Timeout
- Set the timeout for breaking down the Internet after
passing through the time without any action.
IP Address
Assignment
Method(IPCP)
Fixed IP
- Usually ISP dynamically assigns IP address to you each
time you connect to it and request. In some case, your ISP provides
service to always assign you the same IP address whenever you
request. In this case, you can fill in this IP address in the Fixed IP
field. Please contact your ISP before you want to use this function.
Click
Yes
to use this function and type in a fixed IP address in the
box.
Fixed IP Address -
Type a fixed IP address.
LAN2/WAN IP
Network Settings
Obtain an IP address automatically
– Click this button to obtain
the IP address automatically.
Specify an IP address
– Click this radio button to specify some data.
IP Address
– Type the IP address.
Subnet Mask
– Type the subnet mask.
WAN physical type
Check and choose a proper type used for duplex between this device
and other router that
you want to communicate. Both sides should
use the same physical type; otherwise, the connection might be
failed due to inconsistent type. It is recommended for you to set
Auto negotiation as the physical type.
2.6.5 L2TP
To choose
L2TP
as the accessing protocol of the internet, please select
Internet Access Setup
on the
Quick Setup
page.
Next,
choose the
L2TP
link. The following web page will be
shown.
Page 53 / 173
Vigor2900 Series User’s Guide
47
L2TP Setup
L2TP Link
- Click
Enable
to enable a L2TP client to establish a
tunnel to a DSL modem on the WAN interface.
L2TP Server
- Specify the IP address of the L2TP server.
ISP Access Setup
ISP Name
- Type in the ISP Name provided by ISP in this field.
Username
-Type in the username provided by ISP in this field.
Password
-Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup -
You can type in four sets of time
schedule for your request. All the schedules can be set previously in
Application – Schedule
web page and you can use the number that
you have set in that web page.
PPP Setup
PPP Authentication
- Select
PAP only
or
PAP or CHAP
for PPP.
Always On
-Check this box if you want the router keeping
connecting to Internet forever.
Idle Timeout
- Set the timeout for breaking down the Internet after
passing through the time without any action.
IP Address
Assignment
Method(IPCP)
Fixed IP
- Usually ISP dynamically assigns IP address to you each
time you connect to it and request. In some case, your ISP provides
service to always assign you the same IP address whenever you
request. In this case, you can fill in this IP address in the Fixed IP
field. Please contact your ISP before you want to use this function.
Click
Yes
to use this function and type in a fixed IP address in the
box.
Fixed IP Address -
Type a fixed IP address.
LAN2/WAN IP
Network Settings
Obtain an IP address automatically
– Click this button to obtain
the IP address automatically.
Specify an IP address
– Click this radio button to specify some data.
IP Address
– Type the IP address.
Subnet Mask
– Type the subnet mask.
Gateway IP Address
– Type the gateway IP address.
WAN physical type
Check and choose a proper type used for duplex between this device
and other router that
you want to communicate. Both sides should
Page 54 / 173
Vigor2900 Series User’s Guide
48
use the same physical type; otherwise, the connection might be
failed due to inconsistent type. It is recommended for you to set
Auto negotiation as the physical type.
2.6.6 Dialing to a Single ISP
If you access the Internet via a single ISP, press this link.
ISP Name
Enter your ISP name.
Dial Number
Enter the ISDN access number provided by your ISP.
Username
Enter the username provided by your ISP.
Password
Enter the password provided by your ISP.
Require ISP Callback
(CBCP)
If your ISP supports the callback function, check this box to
activate the Callback Control Protocol during the PPP negotiation.
Scheduler (1-15)
Enter the index of schedule profiles to control the Internet access
according to the preconfigured schedules.
Link Type
There are four link types: Link Disable, Dialup 64 Kbps, Dialup 128
Kbps, and Dialup BOD.
Link Disable
- Disable the ISDN dial-out function.
Dialup 64Kbps
- Use one ISDN B channel for Internet access.
Dialup 128Kbps
- Use both ISDN B channels for Internet access.
Dialup BOD
- BOD stands for bandwidth-on-demand. The router
will use only one B channel in low traffic situations. Once the single
B channel bandwidth is fully used, the other B channel will be
activated automatically through the dialup. For more detailed BOD
parameter settings, please refer to the
Advanced Setup
field >
Call
Control and PPP/MP Setup
.
PPP Authentication
PAP Only
- Configure the PPP session to use the PAP protocol to
negotiate the username and password with the ISP.
PAP or CHAP
- Configure the PPP session to use the PAP or
CHAP protocols to negotiate the username and password with the
ISP.
Page 55 / 173
Vigor2900 Series User’s Guide
49
Idle Timeout
Idle timeout means the router will be disconnect after being idle for
a preset amount of time. The default is 180 seconds. If you set the
time to 0, the ISDN connection to the ISP will always remain on.
Fixed IP
In most environments, you should not change these settings as most
ISPs provide a dynamic IP address for the router when it connects to
the ISP. If your ISP provides a fixed IP address, check
Yes t
o invoke
this function
and enter the IP address in the field of
Fixed IP
Address
.
Fixed IP Address
Type the IP address.
2.6.7 Dialing to a Dual ISPs
If you have more than one ISP, press this link to configure two ISP dialup profiles. You will
be able to dial to both ISPs at the same time. This is mainly for those ISPs that do not support
Multiple-Link PPP (ML-PPP) function. In such cases, dialing to two ISPs can increase the
bandwidth utilization of the ISDN channels to 128kbps data speed.
Most configuration parameters are the same as those of the previous part. This screen provides
a checkbox to enable the Dual ISPs function and adds the secondary ISP Setup section field.
Check the corresponding box and enter the second ISP information. About the details please
refer to the descriptions of the previous part.
2.7 Virtual TA (Remote CAPI) Setup
Note: This setting is available for
i
models only.
Virtual TA
means the local hosts or PCs in the network that uses popular CAPI-based
software such as RVS-COM or BVRP to access the router as a local ISDN TA for sending or
receiving FAX messages over the ISDN line. Basically, it is a client/server network model.
The built-in Virtual TA server handles the establishment and release of connections. The
Virtual TA client, which is installed on the local hosts or PCs, creates a CAPI-based driver to
relay all CAPI messages between the applications and the router CAPI module. Before
describing the configuration of
Virtual TA
in the Vigor routers, please notice the following
limitations.
z
The Virtual TA client only supports Microsoft
TM
Windows 95 OSR2.1/98/98SE/Me/2000
platforms.

Rate

3.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top