1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860Vn-plus
    5. /
  5. 71
Page 351 / 794 Scroll up to view Page 346 - 350
Vigor2860 Series User’s Guide
337
3.
Drag and drop an AP icon from
Compatible AP List
to the map on the left side.
4.
Choose the signal strength (e.g., 30% in this case) from
User Define
drop down list. Click
Apply.
5.
Adjust the AP on the map to find out which place can have the best wireless coverage. At
last, click
Save
.
Page 352 / 794
Vigor2860 Series User’s Guide
338
3.14.5 Traffic Graph
Click
Traffic Graph
to open the web page. Choose one of the managed Access Points,
LAN-A or LAN-B, daily or weekly for viewing data transmission chart. Click
Refresh
to
renew the graph at any time.
Note
: Enabling/Disabling such function will also enable/disable the External Devices
function.
The horizontal axis represents time; the vertical axis represents the transmission rate (in kbps).
Page 353 / 794
Vigor2860 Series User’s Guide
339
3.14.6 Rogue AP Detection
It displays the access point scanned by Vigor router. In which, the APs will be classified with
friendly APs, rogue APs and unknown APs in different colors.
Below shows the detected APs by clicking
OK
.
Available settings are explained as follows:
Item
Description
Enable
Neighbor AP Detection –
The
access point(s) registered to
Vigor2860 will be used to detect other access points and send
Page 354 / 794
Vigor2860 Series User’s Guide
340
the scanned results to Vigor2860. Later, the scanned result will
be displayed on this page.
Local WLAN Detection –
The router will detect all the access
points through wireless LAN connection.
Specify the access points which are classified under each type.
Refresh Min(s)
Use the drop down list to specify the time to refresh the web
page.
Refresh
Click such link to refresh the web page immediately.
Ch
Display the channel used by the detected access point.
SSID
Display the SSID specified for the detected access point.
Mode
Display the mode (AP or Ad Hoc) used by the detected access
point.
BSSID
Display the MAC address of the detected access point.
Security
Display the encryption mode used by the access point.
Signal (%)
Display the signal strength (represented by percentage) sent by
the access point.
Beacon Period
Display the period (time) of the beacon. The beacon signal will
be sent out periodically.
Last Detected
Display the date and time that such access point was detected
by Vigor router.
All the APs detected by Vigor router will be treated as unknown APs. You have to specify
which AP is friendly and which one is Rogue respectively. Follow the steps below to perform
the classification of access points.
1.
Click the radio button on one of the access points. In this case, DrayTek-LAN-A is
selected.
Page 355 / 794
Vigor2860 Series User’s Guide
341
2.
Later, some options will appear on the bottom of the page.
Available settings are explained as follows:
Item
Description
AP’s MAC Address
The MAC address of the selected AP will be displayed here
automatically.
AP’s SSID
The SSID of the selected AP will be displayed here
automatically.
Add to
Friendly APs
- If the selected AP shall be treated as Friendly
AP, simply click
Add
to change its classification from
unknown to Friendly.
Rogue APs -
If the selected AP shall be treated as rogue AP,
simply click
Add
to change its classification from unknown to
Rogue.
Delete From
Rogue APs -
If you want to change the classification of the
rogue AP, simply choose the one and click
Delete.
Later, the
page will refresh and the one will be classified as Unknown.
Friendly APs
- If you want to change the classification of the
friendly AP, simply choose the one and click
Delete.
Later, the
page will refresh and the one will be classified as Unknown.
3.
Click
OK
to save the settings.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top