1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860Vn-plus
    5. /
  5. 56
Page 276 / 794 Scroll up to view Page 271 - 275
Vigor2860 Series User’s Guide
262
Only responds to the DNS….
– Different LAN PCs
can share the same domain name. However, you have
to check this box to make the router identify &
respond the IP address for the DNS query coming
from different LAN PC.
Delete
– Click it to remove an existed IP address on the list.
3.
Click
OK
button to save the settings.
4.
If you need to configure LAN DNS settings, click index 1 to edit the LAN DNS profile
just created. Or, you can click index 2 to use this profile as conditional DNS forwarding.
Available settings are explained as follows:
Item
Description
Enable
Check this box to enable such profile.
Profile
Type a name for such profile.
Note:
If you type a name here for conditional DNS
forwarding and click
OK
to save the configuration, the
name also will be applied to LAN DNS automatically.
Domain Name
Type the domain name for such profile.
DNS Server IP
Address
Type the IP address of the DNS server you want to use for
DNS forwarding.
5.
Click
OK
button to save the settings.
6.
A new LAN DNS profile has been created.
Page 277 / 794
Vigor2860 Series User’s Guide
263
Page 278 / 794
Vigor2860 Series User’s Guide
264
3.10.3 Schedule
The Vigor router has a built-in clock which can update itself manually or automatically by
means of Network Time Protocols (NTP). As a result, you can not only schedule the router to
dialup to the Internet at a specified time, but also restrict Internet access to certain hours so
that users can connect to the Internet only during certain hours, say, business hours. The
schedule is also applicable to other functions.
You have to set your time before set schedule. In
System Maintenance>>
Time and Date
menu, press
Inquire Time
button to set the Vigor router’s clock to current time of your PC.
The clock will reset once if you power down or reset the router. There is another way to set up
time. You can inquiry an NTP server (a time server) on the Internet to synchronize the router’s
clock. This method can only be applied when the WAN connection has been built up.
Available settings are explained as follows:
Item
Description
Set to Factory Default
Clear all profiles and recover to factory settings.
Index
Click the number below Index to access into the setting
page of schedule.
Status
Display if this schedule setting is active or inactive.
You can set up to 15 schedules. Then you can apply them to your
Internet Access
or
VPN
and Remote Access >> LAN-to-LAN
settings.
To add a schedule:
1.
Click any index, say Index No. 1.
2.
The detailed settings of the call schedule with index 1 are shown below.
Page 279 / 794
Vigor2860 Series User’s Guide
265
Available settings are explained as follows:
Item
Description
Enable Schedule
Setup
Check to enable the schedule.
Start Date
(yyyy-mm-dd)
Specify the starting date of the schedule.
Start Time (hh:mm)
Specify the starting time of the schedule.
Duration Time
(hh:mm)
Specify the duration (or period) for the schedule.
Action
Specify which action Call Schedule should apply during the
period of the schedule.
Force On -
Force the connection to be always on.
Force Down -
Force the connection to be always down.
Enable Dial-On-Demand -
Specify the connection to be
dial-on-demand and the value of idle timeout should be
specified in
Idle Timeout
field.
Disable Dial-On-Demand -
Specify the connection to be up
when it has traffic on the line. Once there is no traffic over
idle timeout, the connection will be down and never up
again during the schedule.
Idle Timeout
Specify the duration (or period) for the schedule.
How often -
Specify how often the schedule will be applied
Once -
The schedule will be applied just once
Weekdays -
Specify which days in one week should
perform the schedule.
3.
Click
OK
button to save the settings.
Example
Suppose you want to control the PPPoE Internet access connection to be always on (Force On)
from 9:00 to 18:00 for whole week. Other time the Internet access connection should be
disconnected (Force Down).
Page 280 / 794
Vigor2860 Series User’s Guide
266
Office
Hour:
(Force On)
Mon - Sun
9:00 am
to
6:00 pm
1.
Make sure the PPPoE connection and
Time Setup
is working properly.
2.
Configure the PPPoE always on from 9:00 to 18:00 for whole week.
3.
Configure the
Force Down
from 18:00 to next day 9:00 for whole week.
4.
Assign these two profiles to the PPPoE Internet access profile. Now, the PPPoE Internet
connection will follow the schedule order to perform
Force On
or
Force Down
action
according to the time plan that has been pre-defined in the schedule profiles.
3.10.4 RADIUS/TACACS+
Remote Authentication Dial-In User Service (RADIUS) is a security authentication
client/server protocol that supports authentication, authorization and accounting, which is
widely used by Internet service providers. It is the most common method of authenticating and
authorizing dial-up and tunneled network users.
The built-in RADIUS client feature enables the router to assist the remote dial-in user or a
wireless station and the RADIUS server in performing mutual authentication. It enables
centralized remote access authentication for network management.
Available settings are explained as follows:
Item
Description
Enable
Check to enable RADIUS client feature.
Server IP Address
Enter the IP address of RADIUS server
Destination Port
The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
Shared Secret
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret. The
maximum length of the shared secret you can set is 36
characters.
Confirm Shared Secret
Re-type the Shared Secret for confirmation.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top