1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860Vn-plus
    5. /
  5. 44
Page 216 / 794 Scroll up to view Page 211 - 215
Vigor2860 Series User’s Guide
202
3.6.3 User Group
This page allows you to bind several user profiles into one group. These groups will be used in
Firewall>>General Setup
as part of filter rules.
Please click any index number link to open the following page.
Available settings are explained as follows:
Item
Description
Name
Type a name for this user group.
Available User Objects
You can gather user profiles (objects) from
User Profile
page within one user group. All the available user objects
that you have created will be shown in this box. Notice that
user object, Admin and Dial-In User are factory settings.
User defined profiles will be numbered with 3, 4, 5 and so
on.
Page 217 / 794
Vigor2860 Series User’s Guide
203
Selected Keyword Objects
Click
button to add the selected user objects in this
box.
After finishing all the settings here, please click
OK
to save the configuration.
3.6.4 User Online Status
This page displays the user(s) connected to the router and refreshes the connection status in an
interval of several seconds.
Available settings are explained as follows:
Item
Description
Refresh Seconds
Use the drop down list to choose the time interval of
refreshing data flow that will be done by the system
automatically.
Refresh
Click this link to refresh this page manually.
Index
Display the number of the data flow.
User
Display the users which connect to Vigor router currently.
You can click the link under the username to open the user
profile setting page for that user.
IP Address
Display the IP address of the device.
Profile
Display the authority of the account.
Last Login Time
Display the login time that such user connects to the router
last time.
Expired Time
Display the expired time of the network connection for the
user.
Data Quota
Display the quota for data transmission.
Page 218 / 794
Vigor2860 Series User’s Guide
204
Idle Time
Display the idle timeout setting for such profile.
Action
Block
- can avoid specified user accessing into Internet.
Unblock
– allow the user to access into Internet.
Logout
– the user will be logged out forcefully.
3.7 Objects Settings
For IPs in a range and service ports in a limited range usually will be applied in configuring
router’s settings, therefore we can define them with
objects
and bind them with
groups
for
using conveniently. Later, we can select that object/group that can apply it. For example, all
the IPs in the same department can be defined with an IP object (a range of IP address).
3.7.1 IP Object
You can set up to 192 sets of IP Objects with different conditions.
Available settings are explained as follows:
Item
Description
Set to Factory Default
Clear all profiles.
Page 219 / 794
Vigor2860 Series User’s Guide
205
Index
Display the profile number that you can configure.
Name
Display the name of the object profile.
To set a new profile, please do the steps listed below:
1.
Click the number (e.g., #1) under Index column for configuration in details.
2.
The configuration page will be shown as follows:
Available settings are explained as follows:
Item
Description
Name
Type a name for this profile. Maximum 15 characters are
allowed.
Interface
Choose a proper interface.
For example, the
Direction
setting in
Edit Filter Rule
will
ask you specify IP or IP range for WAN or
LAN/DMZ/RT/VPN or any IP address. If you choose
LAN/DMZ/RT/VPN as the
Interface
here, and choose
LAN/DMZ/RT/VPN as the direction setting in
Edit Filter
Rule
, then all the IP addresses specified with
LAN/DMZ/RT/VPN interface will be opened for you to
choose in
Edit Filter Rule
page.
Address Type
Determine the address type for the IP address.
Select
Single Address
if this object contains one IP address
only.
Select
Range Address
if this object contains several IPs
within a range.
Select
Subnet Address
if this object contains one subnet
for IP address.
Select
Any Address
if this object contains any IP address.
Select
Mac Address
if this object contains Mac address.
Page 220 / 794
Vigor2860 Series User’s Guide
206
MAC Address
Type the MAC address of the network card which will be
controlled.
Start IP Address
Type the start IP address for Single Address type.
End IP Address
Type the end IP address if the Range Address type is
selected.
Subnet Mask
Type the subnet mask if the Subnet Address type is
selected.
Invert Selection
If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
4.
After finishing all the settings here, please click
OK
to save the configuration. Below is
an example of IP objects settings.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top