Page 666 / 794
Scroll up to view Page 661 - 665
Vigor2860 Series User’s Guide
652
%Set LAN2 Dhcp Start IP done !!!
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
> msubnet startip ?
% msubnet startip <2/3/4/5/6> <Gateway IP>
% Now: LAN2 192.168.2.90; LAN3 192.168.3.10; LAN4 192.168.4.10; LAN5
192.168.5.1
0; LAN6 192.168.6.10
Telnet Command: msubnet pppip
This command is used to configure a starting IP address for PPP connection.
msubnet pppip
[2/3/4/5/6] [Start IP]
Syntax Description
Parameter
Description
2/3/4/5/6
It means LAN interface.
2=LAN2
3=LAN3
4=LAN4
5=LAN5
6=LAN6
Start IP
Type an IP address as the starting IP address for PPP
connection.
Example
> msubnet pppip 2 192.168.2.250
% Set LAN2 PPP(IPCP) Start IP done !!!
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
> msubnet pppip ?
% msubnet pppip <2/3/4/5/6> <Start IP>
% Now: LAN2 192.168.2.250; LAN3 192.168.3.200; LAN4 192.168.4.200; LAN5
192.168.5.200; LAN6 192.168.6.200
Page 667 / 794
Vigor2860 Series User’s Guide
653
Telnet Command: msubnet nodetype
This command is used to specify the type for node which is required by DHCP option.
msubnet nodetype
[2/3/4/5/6][count]
Syntax Description
Parameter
Description
2/3/4/5/6
It means LAN interface.
2=LAN2
3=LAN3
4=LAN4
5=LAN5
6=LAN6
count
Choose the following number for specifying different
node type.
1= B-node
2= P-node
4= M-node
8= H-node
0= Not specify any type for node.
Example
>
> msubnet nodetype ?
% msubnet nodetype <2/3/4/5/6> <count>
% Now: LAN2 0; LAN3 0; LAN4 0; LAN5 0; LAN6 0
% count: 1. B-node 2. P-node 4. M-node 8. H-node
>
msubnet nodetype 2 1
% Set LAN2 Dhcp Node Type done !!!
> msubnet nodetype ?
% msubnet nodetype <2/3/4/5/6> <count>
% Now: LAN2 1; LAN3 0; LAN4 0; LAN5 0; LAN6 0
Page 668 / 794
Vigor2860 Series User’s Guide
654
% count: 1. B-node 2. P-node 4. M-node 8. H-node
Telnet Command: msubnet primWINS
This command is used to configure primary WINS server.
msubnet primWINS
[2/3/4/5/6] [WINS IP]
Syntax Description
Parameter
Description
2/3/4/5/6
It means LAN interface.
2=LAN2
3=LAN3
4=LAN4
5=LAN5
6=LAN6
WINS IP
Type the IP address as the WINS IP.
Example
>
> msubnet primWINS ?
% msubnet primWINS <2/3/4/5/6> <WINS IP>
% Now: LAN2 0.0.0.0; LAN3 0.0.0.0; LAN4 0.0.0.0; LAN5 0.0.0.0; LAN6
0.0.0.0
> msubnet primWINS 2 192.168.3.5
% Set LAN2 Dhcp Primary WINS IP done !!!
> msubnet primWINS ?
% msubnet primWINS <2/3/4/5/6> <WINS IP>
% Now: LAN2 192.168.3.5; LAN3 0.0.0.0; LAN4 0.0.0.0; LAN5 0.0.0.0; LAN6
0.0.0.0
Telnet Command: msubnet secWINS
This command is used to configure secondary WINS server.
msubnet secWINS
[2/3/4/5/6] [WINS IP]
Syntax Description
Parameter
Description
Page 669 / 794
Vigor2860 Series User’s Guide
655
2/3/4/5/6
It means LAN interface.
2=LAN2
3=LAN3
4=LAN4
5=LAN5
6=LAN6
WINS IP
Type the IP address as the WINS IP.
Example
>
> msubnet secWINS 2 192.168.3.89
% Set LAN2 Dhcp Secondary WINS IP done !!!
> msubnet secWINS ?
% msubnet secWINS <2/3/4/5/6> <WINS IP>
% Now: LAN2 192.168.3.89; LAN3 0.0.0.0; LAN4 0.0.0.0; LAN5 0.0.0.0;
LAN6 0.0.0.0
Page 670 / 794
Vigor2860 Series User’s Guide
656
Telnet Command: msubnet tftp
This command is used to set TFTP server for multi-subnet.
msubnet tftp
[2/3/4/5/6] [TFTP server name]
Syntax Description
Parameter
Description
2/3/4/5/6
It means LAN interface.
2=LAN2
3=LAN3
4=LAN4
5=LAN5
6=LAN6
TFTP server name
Type a name to indicate the TFTP server.
Example
> msubnet tftp ?
% msubnet tftp <2/3/4/5/6> <TFTP server name>
% Now: LAN2
LAN3
LAN4
LAN5
LAN6
> msubnet tftp 2 publish
% Set LAN2 TFTP Server Name done !!!
> msubnet tftp ?
% msubnet tftp <2/3/4/5/6> <TFTP server name>
% Now: LAN2 publish
LAN3
LAN4
LAN5
LAN6
Telnet Command: msubnet mtu
This command allows you to configure MTU value for LAN/DMZ/IP Routed Subnet.
19216811.live