1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860n-plus
    5. /
  5. 84
Page 416 / 794 Scroll up to view Page 411 - 415
Vigor2860 Series User’s Guide
402
3.17.6 Online User Status
If you have finished the configuration of SSL Web Proxy (server), users can find out
corresponding settings when they access into
DrayTek SSL VPN portal
interface.
Next, users can open
SSL VPN>> Online Status
to view logging status of SSL VPN.
Available settings are explained as follows:
Item
Description
Active User
Display current user who visits SSL VPN server.
Host IP
Display the IP address for the host.
Time out
Display the time remaining for logging out.
Action
You can click
Drop
to drop certain login user from the router's
SSL Portal UI.
Page 417 / 794
Vigor2860 Series User’s Guide
403
3.18 USB Application
USB device connected on Vigor router can be regarded as a server or WAN interface. By way
of Vigor router, clients on LAN can access, write and read data stored in USB storage disk
with different applications. After setting the configuration in
USB Application
, you can type
the IP address of the Vigor router and username/password created in
USB Application>>USB
User Management
on the client software. Then, the client can use the FTP site (USB storage
disk) or share the Samba service through Vigor router.
Note
: USB ports on Vigor router are allowed to connect to USB modem. Models of the
modems supported by Vigor router can be seen from
USB Application>>Modem Support
List
. For network connection via USB modem, refer to
WAN>>Internet Access
and
WAN>>General Setup
for detailed information.
3.18.1 USB General Settings
This page will determine the number of concurrent FTP connection, default charset for FTP
server and enable Samba service. At present, the Vigor router can support USB storage disk
with formats of FAT16 and FAT32 only. Therefore, before connecting the USB storage disk
into the Vigor router, please make sure the memory format for the USB storage disk is FAT16
or FAT32. It is recommended for you to use FAT32 for viewing the filename completely
(FAT16 cannot support long filename).
Available settings are explained as follows:
Item
Description
General Settings
Simultaneous FTP Connections -
This field is used to
Page 418 / 794
Vigor2860 Series User’s Guide
404
specify the quantity of the FTP sessions. The router allows up
to 6 FTP sessions connecting to USB storage disk at one
time.
Default Charset -
At present, Vigor router supports four
types of character sets. Default Charset is for English based
file name.
SMB File Sharing Service
(Network Neighborhood)
Enable
- After enabling such feature, Vigor router can been
seen on Network Neighborhood. The user can access into the
USB disk for reading, copying, and writing files from and
onto the USB disk by using the user account and password
defined in
USB Application >>
USB
User Management.
Access Mode
It is available when
SMB File Sharing Service (Network
Neighborhood)
is enabled.
LAN Only
– Users coming from internet cannot connect to
the samba server of the router.
NetBios Name Service
It is available when
SMB File Sharing Service (Network
Neighborhood)
is enabled.
For the NetBios service of USB storage disk, you have to
specify a workgroup name and a host name. A workgroup
name must not be the same as the host name. The workgroup
name can have as many as 15 characters and the host name
can have as many as 23 characters. Both them cannot contain
any of the following--- ; : " < > * + = \ | ?.
Workgroup Name –
Type a name for the workgroup.
Host Name –
Type the host name for the router.
After finishing all the settings here, please click
OK
to save the configuration.
Page 419 / 794
Vigor2860 Series User’s Guide
405
3.18.2 USB User Management
This page allows you to set profiles for FTP/SMB users. Any user who wants to access into
the USB storage disk must type the same username and password configured in this page.
Before adding or modifying settings in this page, please insert a USB storage disk first.
Otherwise, an error message will appear to warn you.
Click index number to access into configuration page.
Available settings are explained as follows:
Item
Description
FTP/Samba User
Enable
– Click this button to activate this profile (account)
for FTP service or Samba User service. Later, the user can
use the username specified in this page to login into FTP
server.
Disable
– Click this button to disable such profile.
Username
Type the username for FTP/Samba users for accessing into
FTP server (USB storage disk). Be aware that users cannot
access into USB storage disk in anonymity. Later, you can
open FTP client software and type the username specified
here for accessing into USB storage disk. The length of the
name is limited to 11 characters.
Note:
“Admin” could not be typed here as username, for
the word is specified for accessing into web pages of Vigor
Page 420 / 794
Vigor2860 Series User’s Guide
406
router only. Also, it is reserved for FTP firmware upgrade
usage.
Note:
FTP Passive mode is not supported by Vigor Router.
Please disable the mode on the FTP client.
Password
Type the password for FTP/Samba users for accessing FTP
server. Later, you can open FTP client software and type
the password specified here for accessing into USB storage
disk. The length of the password is limited to 11 characters.
Confirm Password
Type the password again to make confirmation.
Home Folder
It determines the folder for the client to access into.
The user can enter a directory name in this field. Then, after
clicking
OK
, the router will create the specific/new folder
in the USB storage disk. In addition, if the user types “/”
here, he/she can access into all of the disk folders and files
in USB storage disk.
Note:
When write protect status for the USB storage disk is
ON
, you cannot type any new folder name in this field.
Only “/” can be used in such case.
You can click
to open the following dialog to add any
new folder which can be specified as the Home Folder.
Access Rule
It determines the authority for such profile. Any user, who
uses such profile for accessing into USB storage disk, must
follow the rule specified here.
File
– Check the items (Read, Write and Delete) for such
profile.
Directory
–Check the items (List, Create and Remove) for
such profile.
Before you click
OK
, you have to insert a USB storage disk into the USB interface of the
Vigor router. Otherwise, you cannot save the configuration.

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top