1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2800G
    5. /
  5. 3
Page 11 / 202 Scroll up to view Page 6 - 10
Vigor2800 Series User’s Guide
5
1.1.4 For Vigor2800Gi
ACT
P2P
Firewall WLAN
Printer
DSL
P1
P2
P3
P4
LAN
ISDN
Factory
Reset
DSL
P1
P2
P3
P4
PWR
Printer
ISDN
LED Explanation
LED
Status
Explanation
Blinking
The router is powered on and running properly.
ACT (Activity)
On
The router is powered on.
On
The ISDN network is correctly setup.
ISDN
Blinking
A successful remote connection on the ISDN BRI B1/B2
channel.
On
The P2P function is active.
P2P
Blinking
Starts to prohibit P2P data.
On
The DoS function is enabled.
Firewall
Blinking
When encountered DoS attacks.
On
Wireless access point is ready.
Blinking
Wireless traffic goes through.
WLAN
Off
Wireless access point is turned off.
DSL
On
The ADSL, ADSL2/2+ line is connected.
Printer
On
The USB interface printer is ready.
Orange
A normal 10Mbps connection is through its corresponding
port.
Green
A normal 100Mbps connection is through its corresponding
port.
LAN (P1, P2,
P3, P4)
Blinking
Ethernet packets are transmitting.
Connector Explanation
Interface
Description
Printer
Connecter for a USB printer.
PWR
Connecter for a power adapter with 12-15VDC.
ON/OFF
Power Switch.
LAN P4 – P1
Connecters for local networked devices.
DSL
Connecter for accessing Internet with the ADSL,ADSL2/2+ line
ISDN
Connecter for NT1 (or NT1+) box provided by ISDN service provider.
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly than
usual, release the button. Then the router will restart with the factory default
configuration.
Page 12 / 202
Vigor2800 Series User’s Guide
6
1.1.5 For Vigor2800V
LED Explanation
LED
Status
Explanation
Blinking
The router is powered on and running properly.
ACT
(Activity)
On
The router is powered on.
On
The QoS function is active.
QoS
Off
The QoS function is inactive.
On
The phone is off hook (the handset of phone is hanging).
FXS1/FXS2
Blinking
A phone call is incoming.
VPN
On
The VPN tunnel is launched.
DSL
On
The ADSL, ADSL2/2+ line is connected.
Printer
On
The USB interface printer is ready.
Orange
A normal 10Mbps connection is through its
corresponding port.
Green
A normal 100Mbps connection is through its
corresponding port.
LAN (P1, P2,
P3, P4)
Blinking
Ethernet packets are transmitting.
Connector Explanation
Interface
Description
Printer
Connecter for a USB printer.
PWR
Connecter for a power adapter with 12-15VDC.
ON/OFF
Power Switch.
FXS2 & FXS1
Connecters for telephone set and analog phone with VoIP
communication.
LAN P4 – P1
Connecters for local networked devices.
DSL
Connecter for accessing Internet with the ADSL,ADSL2/2+ line
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Page 13 / 202
Vigor2800 Series User’s Guide
7
1.1.6 For Vigor2800VG
LED Explanation
LED
Status
Explanation
Blinking
The router is powered on and running properly.
ACT
(Activity)
On
The router is powered on.
On
The QoS function is active.
QoS
Off
The QoS function is inactive.
On
The phone is off hook (the handset of phone is hanging).
FXS1/FXS2
Blinking
A phone call is incoming.
On
Wireless access point is ready.
Blinking
Wireless traffic goes through.
WLAN
Off
Wireless access point is turned off.
DSL
On
The ADSL, ADSL2/2+ line is connected.
Printer
On
The USB interface printer is ready.
Orange
A normal 10Mbps connection is through its
corresponding port.
Green
A normal 100Mbps connection is through its
corresponding port.
LAN (P1, P2,
P3, P4)
Blinking
Ethernet packets are transmitting.
Connector Explanation
Interface
Description
Printer
Connecter for a USB printer.
PWR
Connecter for a power adapter with12-15VDC.
ON/OFF
Power Switch.
FXS2 & FXS1
Connecters for telephone set and analog phone with VoIP
communication.
LAN P4 – P1
Connecters for local networked devices.
DSL
Connecter for accessing Internet with the ADSL,ADSL2/2+ line
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Page 14 / 202
Vigor2800 Series User’s Guide
8
1.1.7 For Vigor2800VGi
ACT
ISDN
FXS1
FXS2
WLAN
Printer
DSL
P1
P2
P3
P4
LAN
Phone
Factory
Reset
DSL
P1
P2
P3
P4
PWR
Printer
ISDN
FXS2
FXS1
LED Explanation
LED
Status
Explanation
Blinking
The router is powered on and running properly.
ACT (Activity)
On
The router is powered on.
On
The ISDN network is correctly setup.
ISDN
Blinking
A successful remote connection on the ISDN BRI B1/B2
channel.
On
The phone is off hook (the handset of phone is hanging).
FXS1/FXS2
Blinking
A phone call is incoming.
On
Wireless access point is ready.
Blinking
Wireless traffic goes through.
WLAN
Off
Wireless access point is turned off.
DSL
On
The ADSL, ADSL2/2+ line is connected.
Printer
On
The USB interface printer is ready.
Orange
A normal 10Mbps connection is through its corresponding
port.
Green
A normal 100Mbps connection is through its corresponding
port.
LAN (P1, P2,
P3, P4)
Blinking
Ethernet packets are transmitting.
Connector Explanation
Interface
Description
Printer
Connecter for a USB printer.
PWR
Connecter for a power adapter with12-15VDC.
ON/OFF
Power Switch.
FXS2 & FXS1
Connecters for telephone set and analog phone with VoIP
communication.
LAN P4 – P1
Connecters for local networked devices.
DSL
Connecter for accessing Internet with the ADSL,ADSL2/2+ line
ISDN
Connecter for NT1 (or NT1+) box provided by ISDN service provider.
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly than
usual, release the button. Then the router will restart with the factory default
configuration.
Page 15 / 202
Vigor2800 Series User’s Guide
9
1.2 Hardware Installation
Before starting to configure the router, you have to connect your devices correctly.
1.
Connect the DSL interface to the external ADSL splitter with an ADSL line cable.
2.
Connect one port of 4-port switch to your computer with a RJ-45 cable. This device
allows you to connect 4 PCs directly.
3.
Connect one end of the power cord to the power port of this device. Connect the other
end to the wall outlet of electricity.
4.
Connect the telephone sets with phone lines (for using VoIP function). For the user of
the model without VoIP ports, skip this step.
5.
Power on the router.
6.
Check the
ACT
LED to assure network connections.
(For the detailed information of LED status, please refer to section 1.1.)
Caution
: Each of the FXS ports can be connected to an analog phone only. Do not
connect the FXS ports to the telephone wall jack. This connection might damage your
router.

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top