1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2710n
    5. /
  5. 66
Page 326 / 335 Scroll up to view Page 321 - 325
Vigor2710 Series User’s Guide
314
5.9 How can I get the files from USB storage device connecting
to Vigor router?
Files on USB storage device can be reviewed by opening
USB Applicaiton>>File Explorer.
If it is necessary for you to delete, copy files on the device or write, paste files to the devcie,
it must be done through SAMBA server or FTP server.
Samba service is based on the original USB FTP service. You will need to setup USB FTP
first. We would like to give brief instructions on USB FTP setup here.
1.
Plug the USB device to the USB port on the router. Make sure
Disk Connected
appears on the
Connection Status
as the figure shown below:
2.
Then, please open
USB Application >> USB General Settings
to enable Samba
service.
Page 327 / 335
Vigor2710 Series User’s Guide
315
3.
Setup a user account for the FTP service by using
USB Application >>USB User
Management.
Click
Enable
to enable FTP/Samba User account. Here we add a new
account "user1" and assign authorities “Read”, “Write” and “List” to it.
Click
OK
to save the configuration.
4.
Make sure the FTP service is running properly. Please open a browser and type
.
Use the account "
user1
" to login.
Page 328 / 335
Vigor2710 Series User’s Guide
316
5.
When the following screen appears, it means the FTP service is running properly.
6.
Return to
USB Application >> USB Disk Status
. The information for FTP server will
be shown as below.
7.
Now, users in LAN of Vigor2710 can access into the USB storage device by typing
ftp://192.168.1.1 on any browser. They can add or remove files / directories, depending
on the Access Rule for FTP account settings in
USB Application >>USB User
Management.
Page 329 / 335
Vigor2710 Series User’s Guide
317
T
T
r
r
o
o
u
u
b
b
l
l
e
e
S
S
h
h
o
o
o
o
t
t
i
i
n
n
g
g
This section will guide you to solve abnormal situations if you cannot access into the Internet
after installing the router and finishing the web configuration. Please follow sections below
to check your basic installation status stage by stage.
z
Checking if the hardware status is OK or not.
z
Checking if the network connection settings on your computer are OK or not.
z
Pinging the router from your computer.
z
Checking if the ISP settings are OK or not.
z
Backing to factory default setting if necessary.
If all above stages are done and the router still cannot run normally, it is the time for you to
contact your dealer for advanced help.
6.1 Checking If the Hardware Status Is OK or Not
Follow the steps below to verify the hardware status.
1.
Check the power line and WLAN/LAN cable connections.
Refer to “
1.3 Hardware Installation”
for details.
2.
Turn on the router. Make sure the
ACT LED
blink once per second and the
correspondent
LAN LED
is bright.
3.
If not, it means that there is something wrong with the hardware status. Simply back to
“1.3 Hardware Installation”
to execute the hardware installation again. And then, try
again.
Page 330 / 335
Vigor2710 Series User’s Guide
318
6.2 Checking If the Network Connection Settings on Your
Computer Is OK or Not
Sometimes the link failure occurs due to the wrong network connection settings. After trying
the above section, if the link is stilled failed, please do the steps listed below to make sure
the network connection settings is OK.
For Windows
±
The example is based on Windows XP. As to the examples for other operation
systems, please refer to the similar steps or find support notes in
www.draytek.com
.
1.
Go to
Control Panel
and then double-click on
Network Connections
.
2.
Right-click on
Local Area Connection
and click on
Properties
.
3.
Select
Internet Protocol (TCP/IP)
and then click
Properties
.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top