DrayTek Vigor-2710n Router Manual PDF (Setup & Configuration Guide)

Page 141 / 335 Scroll up to view Page 136 - 140

Vigor2710 Series User’s Guide

129

Enable

Check this box to enable such port redirection setting.

Mode

Two options (Single and Range) are provided here for you to

choose. To set a range for the specific service, select

Range

. In

Range mode, if the public port (start port and end port) and the

starting IP of private IP had been entered, the system will

calculate and display the ending IP of private IP automatically.

Service Name

Enter the description of the specific network service.

Protocol

Select the transport layer protocol (TCP or UDP).

WAN IP

Select the WAN IP used for port redirection. There are eight

WAN IP alias that can be selected and used for port redirection.

The default setting is

All

which means all the incoming data from

any port will be redirected to specified range of IP address and

port.

Public Port

Specify which port can be redirected to the specified

Private IP

and Port

of the internal host. If you choose

Range

as the port

redirection mode, you will see two boxes on this field. Simply

type the required number on the first box. The second one will be

assigned automatically later.

Private IP

Specify the private IP address of the internal host providing the

service. If you choose

Range

as the port redirection mode, you

will see two boxes on this field. Type a complete IP address in

the first box (as the starting point) and the fourth digits in the

second box (as the end point).

Private Port

Specify the private port number of the service offered by the

internal host.

Note that the router has its own built-in services (servers) such as Telnet, HTTP and FTP etc.

Since the common port numbers of these services (servers) are all the same, you may need to

reset the router in order to avoid confliction.

For example, the built-in web configurator in the router is with default port 80, which may

conflict with the web server in the local network, http://192.168.1.13:80. Therefore, you need

to

change the router’s http port to

any one other than the default port 80

to avoid

conflict, such as 8080. This can be set in the

System Maintenance >>Management Setup

.

Page 142 / 335

Vigor2710 Series User’s Guide

130

You then will access the admin screen of by suffixing the IP address with 8080, e.g.,

http://192.168.1.1:8080 instead of port 80.

Page 143 / 335

Vigor2710 Series User’s Guide

131

4.3.2 DMZ Host

As mentioned above,

Port Redirection

can redirect incoming TCP/UDP or other traffic on

particular ports to the specific private IP address/port of host in the LAN. However, other IP

protocols, for example Protocols 50 (ESP) and 51 (AH), do not travel on a fixed port. Vigor

router provides a facility

DMZ Host

that maps ALL unsolicited data on any protocol to a

single host in the LAN. Regular web surfing and other such Internet activities from other

clients will continue to work without inappropriate interruption.

DMZ Host

allows a defined

internal user to be totally exposed to the Internet, which usually helps some special

applications such as Netmeeting or Internet Games etc.

The inherent security properties of NAT are somewhat bypassed if you set up DMZ host.

We suggest you to add additional filter rules or a secondary firewall.

Click

DMZ Host

to open the following page:

If you previously have set up

WAN Alias

for

PPPoE/PPPoA

or

MPoA

mode

,

you will find

them in

Aux. WAN IP

for your selection.

Page 144 / 335

Vigor2710 Series User’s Guide

132

Enable

Check to enable the DMZ Host function.

Private IP

Enter the private IP address of the DMZ host, or click Choose PC

to select one.

Choose PC

Click this button and then a window will automatically pop up, as

depicted below. The window consists of a list of private IP

addresses of all hosts in your LAN network. Select one private IP

address in the list to be the DMZ host.

When you have selected one private IP from the above dialog,

the IP address will be shown on the following screen. Click

OK

to save the setting.

Page 145 / 335

Vigor2710 Series User’s Guide

133

4.3.3 Open Ports

Open Ports

allows you to open a range of

ports for the traffic of special applications.

Common application of Open Ports includes P2P application (e.g., BT, KaZaA, Gnutella,

WinMX, eMule and others), Internet Camera etc. Ensure that you keep the application

involved up-to-date to avoid falling victim to any security exploits.

Click

Open Ports

to open the following page:

Index

Indicate the relative number for the particular entry that you want

to offer service in a local host. You should click the appropriate

index number to edit or clear the corresponding entry.

Comment

Specify the name for the defined network service.

Local IP Address

Display the private IP address of the local host offering the

service.

Status

Display the state for the corresponding entry. X or V is to

represent the

Inactive

or

Active

state.

To add or edit port settings, click one index number on the page. The index entry setup page

will pop up. In each index entry, you can specify

10

port ranges for diverse services.

Rate

Popular DrayTek Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share