DrayTek Vigor-2710n Router Manual PDF (Setup & Configuration Guide)

Page 46 / 335 Scroll up to view Page 41 - 45

Vigor2710 Series User’s Guide

34

for the router.

PPPoE Pass-through

The router offers PPPoE dial-up connection. Besides, you also

can establish the PPPoE connection directly from local clients to

your ISP via the Vigor router. When PPPoA protocol is selected,

the PPPoE package transmitted by PC will be transformed into

PPPoA package and sent to WAN server. Thus, the PC can access

Internet through such direction.

For Wired LAN

– If you check this box, PCs on the same

network can use another set of PPPoE session (different with the

Host PC) to access into Internet.

For Wireless LAN

– If you check this box, PCs on the same

wireless network can use another set of PPPoE session (different

with the Host PC) to access into Internet.

VLAN Enable

- Enable the function of VLAN with tag. The

router will add specific VLAN number to all packets while

sending them out. Please type the tag value and specify the

priority for the packets sending by the router.

VID

– Type the value as the VLAN ID number. The range is form

0 to 4095.

Priority

– Type the packet priority number for such VLAN. The

range is from 0 to 7.

WAN Connection

Detection

Such function allows you to verify whether network connection is

alive or not through ARP Detect or Ping Detect.

Mode

– Choose

ARP Detect

or

Ping Detect

for the system to

execute for WAN detection.

Ping IP

– If you choose Ping Detect as detection mode, you have

to type IP address in this field for pinging.

TTL (Time to Live)

– Displays value for your reference. TTL

value is set by telnet command.

WAN Backup Setup

3G USB Modem –

If you have installed a 3G USB modem on the

router, please

enable

Dial Backup Mode

to perform file backup

via USB device. After choosing

Enable

, please click the

3G USB

Modem

link to access into the following page for configuring

detailed settings.

Page 47 / 335

Vigor2710 Series User’s Guide

35

PPP Client Mode -

Click

Enable

to activate this mode for

WAN2.

SIM PIN code

- Type PIN code of the SIM card that will be used

to access Internet.

Modem Initial String

- Such value is used to initialize USB

modem. Please use the default value. If you have any question,

please contact to your ISP.

APN Name

– APN (Access Point Name) is provided by your ISP

for identifying different access points. Simply click

Apply

to

apply such name. Finally, you have to click

OK

to save the

setting.

Apply

– Activate the function of identification.

Modem Initial String2 -

The initial string 1 is shared with APN.

In some cases, users may need another initial

AT

command to

restrict 3G band or do any special settings.

Modem Dial String

- Such value is used to dial through USB

mode. Please use the default value. If you have any question,

please contact to your ISP.

PPP Username

- Type the PPP username (optional).

PPP Password

- Type the PPP password (optional).

Index (1-15) -

Set the PCs on LAN to work at certain time

interval only. You may choose up to 4 schedules out of the 15

schedules pre-defined in

Applications >> Schedule

setup. The

default setting of this filed is blank and the function will always

work.

WAN Connection Detection -

Such function allows you to

verify whether network connection is alive or not through ARP

Detect or Ping Detect.

Mode

– Choose

ARP Detect

or

Ping Detect

for the system to

execute for WAN detection.

Ping IP

– If you choose Ping Detect as detection mode, you have

to type IP address in this field for pinging.

TTL (Time to Live)

– Displays value for your reference. TTL

value is set by telnet command.

Default –

Click this button to reset to factory setting.

ISP Access Setup

Enter your allocated username, password and authentication

parameters according to the information provided by your ISP. If

you want to connect to Internet all the time, you can check

Always On

.

Username

– Type in the username provided by ISP in this field.

Password

– Type in the password provided by ISP in this field.

PPP Authentication

– Select

PAP only

or

PAP or CHAP

for

PPP.

Idle Timeout

– Set the timeout for breaking down the Internet

after passing through the time without any action. This setting is

active only when the

Active on demand

option for Active Mode

Page 48 / 335

Vigor2710 Series User’s Guide

36

is selected in

WAN>> General Setup

page.

IP Address From ISP

Usually ISP dynamically assigns IP address to you each time you

connect to it and request. In some case, your ISP provides service

to always assign you the same IP address whenever you request.

In this case, you can fill in this IP address in the Fixed IP field.

Please contact your ISP before you want to use this function.

WAN IP Alias

- If you have multiple public IP addresses and

would like to utilize them on the WAN interface, please use

WAN IP Alias. You can set up to 8 public IP addresses other than

the current one you are using. Notice that this setting is available

for WAN1 only. Type the additional WAN IP address and check

the Enable box. Then click OK to exit the dialog.

Fixed IP

– Click

Yes

to use this function and type in a fixed IP

address in the box of

Fixed IP Address

.

Default MAC Address

– You can use

Default MAC

Address

or specify another MAC address by typing on the boxes

of MAC Address for the router.

Specify a MAC Address –

Type the MAC address for the router

manually.

Index (1-15) in Schedule Setup -

You can type in four sets of

time schedule for your request. All the schedules can be set

previously in

Applications – Schedule

web page and you can use

the number that you have set in that web page.

After finishing all the settings here, please click

OK

to activate them.

MPoA

MPoA is a specification that enables ATM services to be integrated with existing LANs,

which use either Ethernet, or TCP/IP protocols. The goal of MPoA is to allow different

LANs to send packets to each other via an ATM backbone.

To use

MPoA

as the accessing protocol of the Internet, select

MPoA

mode. The following

web page will appear.

Page 49 / 335

Vigor2710 Series User’s Guide

37

MPoA

(RFC1483/2684)

Click

Enable

for activating this function. If you click

Disable

,

this function will be closed and all the settings that you adjusted

in this page will be invalid.

DSL Modem Settings

Set up the DSL parameters required by your ISP. These are vital

for building DSL connection to your ISP.

Multi-PVC channel

- The selections displayed here are

determined by the page of

Internet Access

–

Multi PVCs

.

Select

M-PVCs Channel

means no selection will be chosen.

Encapsulating Type

- Drop down the list to choose the type

provided by ISP.

VPI

- Type in the value provided by ISP.

VCI

- Type in the value provided by ISP.

Modulation

– Drop down the list to choose a proper modulation

for the router.

VLAN Enable

- Enable the function of VLAN with tag. The

router will add specific VLAN number to all packets while

sending them out. Please type the tag value and specify the

Page 50 / 335

Vigor2710 Series User’s Guide

38

priority for the packets sending by the router.

VID

– Type the value as the VLAN ID number. The range is form

0 to 4095.

Priority

– Type the packet priority number for such VLAN. The

range is from 0 to 7.

WAN Connection

Detection

Such function allows you to verify whether network connection is

alive or not through ARP Detect or Ping Detect.

Mode

– Choose

ARP Detect

or

Ping Detect

for the system to

execute for WAN detection.

Ping IP

– If you choose Ping Detect as detection mode, you have

to type IP address in this field for pinging.

TTL (Time to Live)

– Displays value for your reference. TTL

value is set by telnet command.

RIP Protocol

Routing Information Protocol is abbreviated as RIP

（

RFC1058

）

specifying how routers exchange routing tables information. Click

Enable RIP

for activating this function.

Bridge Mode

If you choose

Bridged IP

as the protocol, you can check this box

to invoke the function. The router will work as a bridge modem.

WAN Backup Setup

3G USB Modem –

If you have installed a 3G USB modem on the

router, please

enable

Dial Backup Mode

to perform file backup

via USB device. After choosing

Enable,

please click the

3G USB

Modem

link to access into the following page for configuring

detailed settings.

PPP Client Mode -

Click

Enable

to activate this mode for

WAN2.

SIM PIN code

- Type PIN code of the SIM card that will be used

to access Internet.

Modem Initial String

- Such value is used to initialize USB

modem. Please use the default value. If you have any question,

please contact to your ISP.

APN Name

– APN (Access Point Name) is provided by your ISP

for identifying different access points. Simply click

Apply

to

Rate

Popular DrayTek Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share