19216811.liveVigor2710 Series User’s Guide
234
4.11.4 DECT
From this page, you can enable register or deregister handsets for using DECT function.
Refresh Seconds
Specify the interval of refresh time to obtain the latest VoIP
calling information. The information will update immediately
when the
Refresh
button is clicked.
Handset
After DECT phone registered with router, it would be assigned
one unique handset ID.
Status
It is used to indicate the DECT handset status. For example, if
you have registered with router DECT module, you would get –
F00_REGISTERED_IDLE
. If you get one incoming call for
this DECT handset, you would see -
F07_CALL_RECEIVED.
PCM Channel
This field can distinguish which PCM channel is used by
the handset. 255 (default setting) means it is idle and voice data
is not transferred through any PCM channel.
Deregister Handset
If your handset has registered to the router, you could use this
button to deregister it from router.
Wideband Voice
Check this box to enable the function to avoid hearing noisy
voice.
Ring Handset
Check this box to enable the function.
DECT phone access
mode
When registering with DECT phone, you will be asked to type
access code. The default setting in Vigor2710VDn is
1234
.
Enable Registration
Mode
If you want to use handset to register with the router, you need
to enable DECT module registration mode via this button.
Otherwise, you can't search our DECT base station from the air.