1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2132FVn
    5. /
  5. 3
Page 11 / 51 Scroll up to view Page 6 - 10
Vigor2132 Series Quick Start Guide
3
1.1
Panel Explanation
1.1.1 Vigor2132FVn
LED
Status
Explanation
Blinking
The router is powered on and running
normally.
ACT (Activity)
Off
The router is powered off.
On
USB device is connected and ready for use.
USB1/USB2
Blinking
The data is transmitting.
On
Internet connection is ready.
Off
Internet connection is not ready.
WAN
Blinking
The data is transmitting.
On
Wireless access point is ready.
WLAN
Blinking
It will blink slowly while wireless traffic goes
through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and
will return to normal condition after two
minutes. (You need to setup WPS within 2
minutes.)
On
The VPN tunnel is active.
Off
VPN services are disabled
VPN
Blinking
Traffic is passing through VPN tunnel.
On
SFP Module is plugged and fiber link is up.
Fiber
Off
SFP Module is unplugged or the fiber link is
down.
On
The phone connected to this port is off-hook.
Off
The phone connected to this port is on-hook.
Phone1/
Phone2
Blinking
A phone call comes.
LED on Connector
On
The port is connected.
Off
The port is disconnected.
Left
LED
Blinking
The data is transmitting.
On
The port is connected with 1000Mbps.
LAN1~
LAN4
Right
LED
Off
The port is connected with 10/100Mbps
Page 12 / 51
Vigor2132 Series Quick Start Guide
4
Interface
Description
Wireless LAN
ON/OFF/WPS
Press the button and release it within 2 seconds.
When the wireless function is ready, the green LED
will be on.
Press the button and release it within 2 seconds to
turn off the WLAN function. When the wireless
function is not ready, the LED will be off.
When WPS function is enabled by web user
interface, press this button for more than 2 seconds to
wait for client’s device making
network connection
through WPS.
Factory Reset
Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
USB1~USB2
Connecter for a USB device.
WAN
Fiber connection (100/1000Mbps) for accessing the
Internet.
LAN1~LAN4
Connecters for local network devices.
Phone1~ Phone2
Connecter for analog phone(s).
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
Page 13 / 51
Vigor2132 Series Quick Start Guide
5
1.1.2 Vigor2132ac/Vac
LED
Status
Explanation
Blinking
The router is powered on and running
normally.
ACT (Activity)
Off
The router is powered off.
On
USB device is connected and ready for use.
USB1~USB2
Blinking
The data is transmitting.
On
Internet connection is ready.
Off
Internet connection is not ready.
WAN
Blinking
The data is transmitting.
On
Wireless access point with bandwidth of
2.4GHz/5GHz is ready.
2.4G/5G
Blinking
It will blink slowly while wireless traffic
goes through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and
will return to normal condition after two
minutes. (You need to setup WPS within 2
minutes.)
CSM
On
The profile(s) of CSM (Content Security
Management) for IM/P2P, URL/Web
Content Filter application can be enabled
from
Firewall >>General Setup
. (Such
profile must be established under
CSM
menu).
On
The DoS function is active.
DoS
Blinking
It will blink while detecting an attack.
QoS
On
The QoS function is active.
On
The phone connected to this port is
off-hook.
Phone1 ~
Phone2
Off
The phone connected to this port is
Page 14 / 51
Vigor2132 Series Quick Start Guide
6
on-hook.
Blinking
A phone call comes.
LED on Connector
On
The port is connected.
Off
The port is disconnected.
Left
LED
Blinking
The data is transmitting.
On
The port is connected with 1000Mbps.
WAN
Right
LED
Off
The port is connected with 10/100Mbps
On
The port is connected.
Off
The port is disconnected.
Left
LED
Blinking
The data is transmitting.
On
The port is connected with 1000Mbps.
LAN1~
LAN4
Right
LED
Off
The port is connected with 10/100Mbps
Page 15 / 51
Vigor2132 Series Quick Start Guide
7
Interface
Description
Wireless LAN
ON/OFF/WPS
Press the button and release it within 2 seconds.
When the wireless function is ready, the green LED
will be on.
Press the button and release it within 2 seconds to
turn off the WLAN function. When the wireless
function is not ready, the LED will be off.
When WPS function is enabled by web user
interface, press this button for more than 2 seconds
to wait for client’s device making
network
connection through WPS.
Factory Reset
Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual,
release the button. Then the router will restart with
the factory default configuration.
USB1~USB2
Connecter for a USB device.
WAN
Connecter for local network devices or modem for
accessing Internet.
LAN1~LAN4
Connecters for local network devices.
Phone1~ Phone2
Connecter for analog phone(s).
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top