Vigor2130 Series User’s Guide
6
1.2.3 For Vigor2130Vn
LED
Status
Explanation
Blinking
The router is powered on and running
normally.
ACT
(Activity)
Off
The router is powered off.
On
Hardware NAT is enabled.
HPA
Off
Hardware NAT is disabled.
On (Orange)
The port is connected with 100Mbps.
On (Green)
The port is connected with 1000Mbps.
Off
The port is disconnected.
WAN
Blinking
It will blink while transmitting data.
On (Orange)
The port is connected with 100Mbps.
On (Green)
The port is connected with 1000Mbps.
Off
The port is disconnected.
LAN
1/2/3/4
Blinking
The data is transmitting.
On
A USB device is connected and active.
USB1/2
Blinking
The data is transmitting.
On
The phone connected to this port is
off-hook.
Off
The phone connected to this port is
on-hook.
Phone1/
Phone2
Blinking
A phone call comes.
On
Wireless access point is ready.
WLAN
Blinking
It will blink while wireless traffic goes
through.
On
Press this button for 2 seconds to wait
for client device making network
connection through WPS. When the
LED lights up, the WPS connection will
be on.
Off
The WPS is off.
WPS
Button
Blinking
Waiting for wireless client sending
requests for connection about two
minutes.
Interface
Description
WLAN
Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
WAN
Connector for accessing the Internet.
LAN
(1/2/3/4)
Connectors for local networked devices.
USB (1/2)
Connector for USB storage (Pen Driver/Mobile HD) or
printer.
19216811.live