1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2110
    5. /
  5. 39
Page 191 / 275 Scroll up to view Page 186 - 190
Vigor2110 Series User’s Guide
184
For
Block Unknown Domain –
this function can block incoming calls (through Phone port)
from unrecognized domain that is not specified in SIP accounts. Such control also can be done
based on preconfigured schedules.
For
Block IP Address –
this function can block incoming calls (through Phone port) coming
from IP address. Such control also can be done based on preconfigured schedules.
Regional
This page allows you to process incoming or outgoing phone calls by regional. Default values
(common used in most areas) will be shown on this web page. You
can change
the number
based on the region that the router is placed.
Page 192 / 275
Vigor2110 Series User’s Guide
185
Last Call Return [Miss]
Sometimes, people might miss some phone calls. Please dial
number typed in this field to know where the last phone call
comes from and call back to that one.
Last Call Return [In]
You have finished an incoming phone call, however you want
to call back again for some reason. Please dial number typed in
this field to call back to that one.
Last Call Return [Out]
Dial the number typed in this field to call the previous outgoing
phone call again.
Call Forward [All][Act]
Dial the number typed in this field to forward all the incoming
calls to the specified place.
Call Forward [Deact]
Dial the number typed in this field to release the call forward
function.
Call Forward [Busy][Act]
Dial the number typed in this field to forward all the incoming
calls to the specified place while the phone is busy.
Call Forward [No Ans][Act]
Dial the number typed in this field to forward all the incoming
calls to the specified place while there is no answer of the
connected phone.
Do Not Disturb [Act]
Dial the number typed in this field to invoke the function of
DND.
Do Not Distrub [Deact]
Dial the number typed in this field to release the DND function.
Hide caller ID [Act]
Dial the number typed in this field to make your phone number
(ID) not displayed on the display panel of remote end.
Hide caller ID [Deact]
Dial the number typed in this field to release this function.
Page 193 / 275
Vigor2110 Series User’s Guide
186
Call Waiting [Act]
Dial the number typed in this field to make all the incoming
calls waiting for your answer.
Call Waiting [Deact]
Dial the number typed in this field to release this function.
Block Anonymous[Act]
Dial the number typed in this field to block all the incoming
calls with unknown ID.
Block Anonymous[Deact]
Dial the number typed in this field to release this function.
Block Unknown Domain
[Act]
Dial the number typed in this field to block all the incoming
calls from unknown domain.
Block Unknown Domain
[Deact]
Dial the number typed in this field to release this function.
Block IP Calls [Act]
Dial the number typed in this field to block all the incoming
calls from IP address.
Block IP Calls [Deact]
Dial the number typed in this field to release this function.
Block Last Calls [Act]
Dial the number typed in this field to block the last incoming
phone call.
PSTN Setup
Some emergency phone (e.g., 911) or special phone cannot be dialed out by using VoIP and
can be called out through PSTN line only. To solve this problem, this page allows you to set
five sets of PSTN number for dialing without passing through Internet. Please type the number
in the field of
phone number for
PSTN relay
.
Then, check the
Enable
box to make the PSTN number available for dial whenever you need.
4.12.2 SIP Accounts
In this section, you set up your own SIP settings. When you apply for an account, your SIP
service provider will give you an
Account Name
or user name,
SIP Registrar, Proxy,
and
Domain name
. (The last three might be the same in some case). Then you can tell your folks
your SIP Address as in
Account Name@ Domain name
Page 194 / 275
Vigor2110 Series User’s Guide
187
As Vigor VoIP Router is turned on, it will first register with Registrar using
AuthorizationUser@Domain/Realm. After that, your call will be bypassed by SIP Proxy to the
destination using AccountName@Domain/Realm as identity.
Index
Click this link to access into next page for setting SIP account.
Profile
Display the profile name of the account.
Domain/Realm
Display the domain name or IP address of the SIP registrar
server.
Proxy
Display the domain name or IP address of the SIP proxy server.
Account Name
Display the account name of SIP address before @.
Ring Port
Specify which port will ring when receiving a phone call.
STUN Server
Type in the IP address or domain of the STUN server.
External IP
Type in the gateway IP address.
SIP PING interval
The default value is 150 (sec). It is useful for a Nortel server
NAT Traversal Support.
Status
Show the status for the corresponding SIP account.
R
means
such account is registered on SIP server successfully.
–
means
the account is failed to register on SIP server.
Page 195 / 275
Vigor2110 Series User’s Guide
188
Profile Name
Assign a name for this profile for identifying. You can type
similar name with the domain. For example, if the domain name
is
draytel.org
, then you might set
draytel-1
in this field.
Register via
If you want to make VoIP call without register personal
information, please choose
None
and check the box to achieve
the goal.
Some SIP server allows user to use VoIP function
without registering. For such server, please check the box of
Call without Registration
. Choosing
Auto
is recommended.
The system will select a proper way for your VoIP call.

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top