Page 61 / 64
Scroll up to view Page 56 - 60
60
System
System Logs
System Logs:
As the DWR-923 manages network traffic and
communication, it continuously generates logs for troubleshooting and
network analysis by the home network administrator. The logging
features for various sections can be enabled for desired features (such
as network, security, applications and administration) to analyze the
actions performed in these sections of the DWR-923.
1. Check Enable Logging box to enable log collection on the DWR-923.
2. Select a Log Category from All, Network, Security, Administration or
Page 62 / 64
61
Applications to display the appropriate logs in the View Logs section.
3. Click Apply to apply the changes. Or click Reset to undo your
configurations.
View Logs:
The logs are displayed in this section. Click Refresh Log to
view the most up-to-date log information. Or click Clear Log to erase all
of the log information.
Download Tar Log Files:
Select a tar log file and then click Download to
download the selected file to your computer.
Remote Logging:
You can write and maintain the log data to a remote
computer using the remote logging function. Enable this function and
enter the IP address of this computer.
Page 63 / 64
62
4.
Appendix
4.1
Connected PC IP Address Configuration
Appropriate IP address settings are required to communicate with the
DWR-923. The following instructions use Windows XP to demonstrate
the IP setup steps.
1.
In the Windows Start menu, click Control Panel.
2.
Double-click Network Connections (if required, switch to Classic
View first).
3.
Right-click Local Area Connection and then click Properties.
4.
The Local Area Connection Properties window will appear:
Page 64 / 64
63
5.
From the
“
This connection uses the following items
”
list, select
Internet Protocol (TCP/IP) and then click Properties. The Internet
Protocol (TCP/IP) window will appear:
6.
If you select “
Obtain an IP address automatically,
” click the OK
button to finish your configuration.
7.
If you select “
Use the following IP address,
” ensure that your
IP
address is from
192.168.0.100 to 192.168.0.254. The subnet mask
is 255.255.255.0.
8.
Click OK
OK to apply this IP address setting.
19216811.live