Page 71 / 88
Scroll up to view Page 66 - 70
66
D-Link DWR-921 User Manual
Section 4 - Connecting to a Wireless Network
Configuring Wireless Security
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you
are joining an existing network, you will need to know the security key or passphrase being used.
2. The utility will display any available wireless networks in your area.
1. Click on the wireless icon in your system tray (lower-right corner).
Wireless
Page 72 / 88
67
D-Link DWR-921 User Manual
Section 4 - Connecting to a Wireless Network
3. Highlight the wireless network (SSID) you would like to connect to and
click the
Connect
button.
4. The following window appears while your computer tries to connect to
the router.
Page 73 / 88
68
D-Link DWR-921 User Manual
Section 4 - Connecting to a Wireless Network
5. Enter the same security key or passphrase that is on your router and click
Connect
.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The key
or passphrase must be exactly the same as on the wireless router.
Page 74 / 88
69
D-Link DWR-921 User Manual
Section 4 - Connecting to a Wireless Network
Using Windows Vista™
Windows
®
Vista
™
users may use the built-in wireless utility. If you are using another company’s utility or Windows
®
2000, please refer to the user
manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows
®
Vista
™
utility as seen below.
Right-click on the wireless computer icon in your system tray (lower-right corner
next to the time). Select
Connect to a network
.
If you receive the
Wireless Networks Detected
bubble, click on the center of
the bubble to access the utility.
or
The utility will display any available wireless networks in your area. Click on a
network (displayed using the SSID) and click the
Connect
button.
If you get a good signal but cannot access the Internet, check the TCP/IP settings
for your wireless adapter. Refer to “Networking Basics” on page 80 for more
information.
Page 75 / 88
70
D-Link DWR-921 User Manual
Section 4 - Connecting to a Wireless Network
Configuring Wireless Security
It is recommended to enable wireless security (WEP/WPA/WPA2) on your wireless router or access point before configuring your wireless adapter.
If you are joining an existing network, you will need to know the security key or passphrase being used.
2.
Highlight the wireless network (SSID) you would like to connect to and click
Connect
.
1.
Open the Windows
®
Vista
™
Wireless Utility by right-clicking on the wireless
computer icon in your system tray (lower right corner of screen). Select
Connect to a network
.
19216811.live