1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DWL-P1012
    5. /
  5. 9
Page 41 / 51 Scroll up to view Page 36 - 40
37
To synchronize the DWL-P1012 with an NTP server to retrieve the current time
and date select ‘SNTP Time’ from the drop down menu.
The DWL-P1012 will
then contact the first SNTP server in the time server list in a top-down order to
update the system time.
The correct time should appear in the appropriate
fields.
Click the ‘Set Time’ button to apply changes.
Page 42 / 51
38
Trap Setting
The Trap Setting enables the DWL-P1012 to monitor the selected Events
through the Web Management Utility, configure the Trap IP Address of the
manager where the trap should be sent.
System Events:
Monitoring the system’s Status.
Device Bootup:
a trap when booting up the system.
Illegal Login:
a trap when a wrong password is used in a login attempt.
The IP
address of the source will be recorded.
PoE Events:
Monitoring the PoE ports status.
PoE Power fail:
a trap when the port’s power source has failed.
Power on/Power off:
a trap when the PoE port’s power is on and down.
Power over current:
a trap when the PoE port’s power is over current.
Power short circuit:
a trap when the PoE port’s power circuit was short.
Page 43 / 51
39
Set Password
A password is an invaluable tool for the manager to secure the management
interface of the DWL-P1012, use this function to change the password.
If you forget the password, press the “Reset” button in the front panel of the
DWL-P1012 for 10-15 Seconds. All current settings such as Port Settings,
SNMP, etc. will be lost and the DWL-P1012 will be restored to the factory
default settings.
Backup Setting
The backup tools allow one to create backup files of current settings of the
DWL-P1012. To generate a configuration backup file, press the “Backup” button.
To restore a configuration backup file to the device, browse to the location of the
backup file on the local Hard Drive and press the “Restore” button to reconfigure
with the settings of the recorded file.
Note:
when restoring a backup configuration file, the current admin password
will not be erased.
Reset Setting
The Factory Reset button will reset the device back to factory default settings.
Be aware that all configuration data will be lost, and the IP address of the device
will revert to the default value of 192.168.0.1.
Page 44 / 51
40
Logout
Clicking the logout Hyperlink will log you out of the web-based administrative
interface.
You will be redirected to the beginning log-in page.
Page 45 / 51
41
WARRANTY
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-
Link”) provides this Limited warranty for its product only to the person or entity
that originally purchased the product from:
D-Link or its authorized reseller or distributor and
Products purchased and delivered within the fifty states of the United States, the
District of Columbia, U.S. Possessions or Protectorates, U.S. Military
Installations, addresses with an APO or FPO.
Limited Warranty
:
D-Link warrants that the hardware portion of the D-Link
products described below will be free from material defects in workmanship and
materials from the date of original retail purchase of the product, for the period
set forth below applicable to the product type (“Warranty Period”), except as
otherwise stated herein.
1-Year Limited Warranty for the Product(s) is defined as follows:
Hardware (excluding power supplies and fans) One (1) Year
Power Supplies and Fans One (1) Year
Spare parts and spare kits Ninety (90) days
D-Link’s sole obligation shall be to repair or replace the defective Hardware
during the Warranty Period at no charge to the original owner or to refund at D-
Link’s sole discretion.
Such repair or replacement will be rendered by D-Link at
an Authorized D-Link Service Office. The replacement Hardware need not be
new or have an identical make, model or part.
D-Link may in its sole discretion
replace the defective Hardware (or any part thereof) with any reconditioned
product that D-Link reasonably determines is substantially equivalent (or
superior) in all material respects to the defective Hardware.
Repaired or
replacement Hardware will be warranted for the remainder of the original
Warranty Period from the date of original retail purchase.
If a material defect is
incapable of correction, or if D-Link determines in its sole discretion that it is not
practical to repair or replace the defective Hardware, the price paid by the
original purchaser for the defective Hardware will be refunded by D-Link upon
return to D-Link of the defective Hardware.
All Hardware
(or part thereof) that is
replaced by D-Link, or for which the purchase price is refunded, shall become
the property of D-Link upon replacement or refund.

Rate

124.8 / 5 based on 304 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top