Page 31 / 79
Scroll up to view Page 26 - 30
31
Using the Configuration Utility in
AP Client Mode
(continued)
Tools > Firmware
You can upgrade the firmware of the router here. Make sure the firmware you want to
use is on the local hard drive of the computer. Check the D-Link support site for firmware
After you have downloaded the firmware upgrade to your hard drive, click
Browse
to
browse the local hard drive and locate the firmware to be used for the update.
Firmware Upgrade-
Browse-
Click on the link in this screen to find out if there is updated
firmware; if so, download the new firmware to your hard drive.
After you have downloaded the new firmware, click
Browse
in
this window to locate the firmware update on your hard drive.
Click
Apply
to complete the firmware upgrade.
Page 32 / 79
32
Using the Configuration Utility in
AP Client Mode
(continued)
Status > Device Info
This screen displays the current firmware version, and the current wireless and Ethernet
settings of the DWL-G730AP.
Page 33 / 79
33
Using the Configuration Utility in
AP Client Mode
(continued)
Status > Stats
This screen displays theTraffic Statistics. Here you can view the amount of packets
that pass through the DWL-G730AP on both the Ethernet and the wireless networks.
The traffic counter will reset if the device is rebooted.
Page 34 / 79
34
Using the Configuration Utility in
AP Client Mode
(continued)
Help
The Help menu is displayed here. Click on a topic to learn more about it.
Page 35 / 79
35
Using the Configuration Utility
in
Router Mode
Home > Wizard
The Home>Wizard
screen will appear.
Please refer to the
Quick Installation Guide
for more information
regarding the Setup
Wizard.
Note:
if you have changed the default IP address assigned to
the DWL-G730AP, make sure to enter the correct IP address.
Open the Web browser
Type in the
IP address
of the router
Type
admin
in the
User Name
field
Leave the
Password
blank
Click
OK
To configure the DWL-G730AP in Router mode, you must be connected to the router
via a wireless network adapter. The LAN Port on the unit functions as a WAN port when
the DWL-G730AP is operating in Router mode. To run the setup wizard, establish a
wireless connection with the DWL-G730AP and follow the steps below.
To use the DWL-G730AP as a router, toggle the switch on the back of the unit.
19216811.live