D-Link DWL-900AP+v2 Router Manual PDF (Setup & Configuration Guide)

Page 1 / 8

Before You Begin

It’s best to use a computer (with an Ethernet adapter) that is connected to a router for

configuring the DWL-900AP+. The default IP address for the DWL-900AP+ is

192.168.0.50

with a Subnet Mask of

255.255.255.0

. You will need to assign your

computer a Static IP address within the same range as the DWL-900AP+’s IP address

for the purpose of configuration of the DWL-900AP+.

See the Manual on the CD-ROM

if you need assistance in assigning a Static IP address for your network adapter.

Check Your Package Contents

These are the items included with your DWL-900AP+ purchase:

If any of the above items are missing, please contact your reseller.

holders. Software and specifications subject to change without notice. DWL-900AP+.10042002

This product can be set up using any

current web browser, i.e., Internet

Explorer 5x, Netscape Navigator 4x.

DWL-900AP+

D-Link AirPlus™

Wireless Access Point

• DWL-900AP+ Wireless Access Point

• CD-ROM (containing Manual and Warranty)

• Ethernet (CAT5 UTP/Straight Through) Cable

• 5V DC, 2A Power Adapter

Using a power

supply with a

different voltage rating

will damage and void

the warranty for this

product.

Page 2 / 8

When connecting

the DWL-900AP+

Wireless Access Point to

an Ethernet Adapter in a

computer, use a Cross-

Over Ethernet cable.

Connecting The DWL-900AP+ Wireless

Access Point To Your Network

A.

First, connect the power adapter to the

receptor

at the back panel of

the DWL-900AP+ and then plug the other end of the power adapter to

a wall outlet or power strip. The Power LED will turn

ON

to indicate

proper operation.

B.

Using a Straight-Through Ethernet

cable, insert one end of the cable to the

Ethernet port

on the back panel of the

DWL-900AP+ and the other end of the

cable to an

Ethernet Broadband

Router

(i.e., D-Link DI-604) or

Switch

(i.e., D-Link DSS-5+). Note: The router

or switch must be connected to the computer to be used to configure

the DWL-900AP+.

The Link LED light will illuminate to indicate a

proper Ethernet connection.

C.

Computers with 802.11b wireless adapters can connect to the DWL-

900AP+. The DWL-650+ AirPlus Wireless Cardbus Adapter and the

DWL-520+ AirPlus Wireless PCI Adapter will connect, out of the

box

, with the DWL-900AP+, using their default wireless settings.

A

.

Receptor

for

Power

Adapter

Reset Button

Pressing this button

restores the DWL-

900AP+ to its original

factory default

settings.

C

.

Antenna

Used to wirelessly

connect to

802.11b adapters.

B

.

Ethernet Port

This is the connection for

the Ethernet Cable to the

Ethernet port on the

Ethernet Broadband

Router or Switch.

Page 3 / 8

When you have completed

the steps in this

Quick

Installation Guide,

your

connected network should

look similar to this:

Using The Setup Wizard

Open your Web

browser

and type

“http://192.168.0.50”

into the URL address

box. Then press the

Enter

or

Return

key.

Type

“admin”

for the

username and leave the

password field blank.

Click

OK

The logon pop-up

screen will appear.

Page 4 / 8

Using The Setup Wizard (continued)

Click

Run Wizard

Click

screens.

Once you have

logged in, the

Home

screen

will appear.

Page 5 / 8

Click

-

Set up your new

password

. You have the

option to establish a

password.

Step 2

-

Wireless Setup

The default wireless settings are:

SSID =

default

Channel =

6

You can change these settings

to match an existing wireless

network.

Step 3

-

Encryption

The DWL-900AP+ is capable

of three levels of wireless

encryption - 64-bit, 128-bit,

and 256-bit.

By default the

encryption is disabled.

You

can change the encryption

settings for more secure

wireless communication.

D-Link DWL-900AP+v2 Router Manual PDF (Setup & Configuration Guide)

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share