D-Link DWL-810 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of D-Link DWL-810 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 8
Before You Begin
You must have at least the following:
An Ethernet-enabled device, such as a game console, laptop or desktop computer,
network printer or set-top box that will connect to the DWL-810
Check Your Package Contents
These are the items included with your DWL-810 purchase:
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective
holders. Software and specifications subject to change without notice. DWL-810. 07082002
DWL-810
D-Link Air™
Ethernet-to-Wireless Bridge
DWL-810 Ethernet-to-Wireless Bridge
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP) Cable
5V DC 2
.5
A Power Adapter
Using a power supply with a
different voltage rating will
damage this product and
void its warranty.
Web-based Configuration will
require a current web browser, i.e.,
Internet Explorer 5.x, Netscape
Navigator 4.x.
Page 2 / 8
Connecting the DWL-810 Ethernet-to-Wireless
Bridge to your Ethernet-enabled device
A.
First, connect the power adapter to the
receptor
at the back panel of the
DWL-810 and then plug the other end of the power adapter to a wall
outlet or power strip.
The Power LED will turn
ON
to indicate proper
operation.
B.
Insert one end of the
Cross-Over
Ethernet cable (included) to the
Ethernet port on the back panel of the DWL-810 and connect the other
end to the Ethernet port located on the device (e.g., a Set Top Box,
Gaming Console, laptop or desktop computer, or network printer.) The
LED light will illuminate to indicate proper connection.
C.
The antenna is used by the DWL-810 to connect to other 802.11b
wireless devices.
If you are wirelessly connecting the DWL-810 to an
Access Point or Wireless Router on a larger wireless
network, additional configuration is required (see
Step 3 )
No configuration of the DWL-810 is needed if your setup is similar
to Setup #1
(shown on the following page, in Step 2.)
B
C
A
Page 3 / 8
How the DWL-810 Ethernet-to-Wireless
Bridge Connects to other Wireless
Devices
When you have completed the steps in this
Quick Installation Guide
,
and you have connected the DWL-810 to your host computer, set
top box, or gaming console, you will be able to wirelessly connect
to other 802.11b wireless devices to share files, join multiplayer
video games or even share your internet connection over the
wireless network (Setup #2.)
Setup #1
Page 4 / 8
Setup #2
If you are connecting in
Setup #2
mode (as shown above), please
continue to Step 3 in this guide.
If you are connecting in
Setup #1
mode, no further configuration is needed!
You are ready to enjoy your
connection with the DWL-810 right now!
Wireless
Router
Page 5 / 8
Web-based Configuration
If you need to configure the DWL-810, follow the steps below:
Before You Begin the Configuration
It’s best to use a computer (with an Ethernet adapter) that is connected directly to the
DWL-810 for configuration. The default IP address for the DWL-810 is
192.168.0.30
with a Subnet Mask of
255.255.255.0
. You will need to assign your computer a Static
IP address within the same range as the DWL-810’s IP address in order to configure
the DWL-810.
See the Appendix in this
Quick Installation Guide
if you need
assistance in assigning a Static IP address.
The configuration window will open, as shown on the next page.
Type
“admin”
for the
username and leave the
password field blank.
Click
OK
The logon pop-up
screen will appear.
Open your Web
browser
and type
into the URL address
box. Then press the
Enter
or
Return
key.
admin

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top