1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DWL-7000AP

D-Link DWL-7000AP Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of D-Link DWL-7000AP router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 8
1
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3 or later.
5V 2.5A DC Power Adapter
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DWL-7000AP. 06192003
Before You Begin
Check Your Package Contents
DWL-7000AP Wireless Access Point
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP/Straight-Through) Cable
If any of the above items are missing, please contact your reseller.
The default IP address for the DWL-7000AP is
192.168.0.50
with a Subnet Mask of
255.255.255.0
. You will need to assign your computer a Static IP address within the
same range as the DWL-7000AP’s IP address for the purpose of configuring the DWL-
7000AP.
See the Manual on the CD-ROM if you need assistance in assigning a
Static IP address for your network adapter.
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
DWL-7000AP
D-Link
Air
Xpert
TM
Tri-mode Dualband Wireless
Access Point
Page 2 / 8
2
Connecting The DWL-7000AP To Your
Network
A.
First, connect the power adapter to the
receptor
at the back panel of
the DWL-7000AP and then plug the other end of the power adapter
to a wall outlet or power strip. The Power LED will turn
ON
to indicate
proper operation.
B.
Insert an Ethernet crossover-cable into the
LAN port
on the back panel
of the
DWL-7000AP and an available Ethernet port on the network
adapter in the computer you will use to configure the DWL-7000AP. The
Link
LED for the LAN Port will illuminate to indicate a proper connection.
C.
Computers with 802.11a/b/g wireless adapters can connect to the
DWL-7000AP. The DWL-AG650 AirXpert Wireless Cardbus Adapter and
the DWL-AG520 AirXpert Wireless PCI Adapter will connect, out of the
box, with the DWL-7000AP, using their default settings.
A.
Receptor for
Power Adapter
.
Reset Button
Pressing this button restores
the Router to its original factory
default settings.
B.
LAN PORT
is for
connecting to a switch
on the local network
with an ethernet cable
C.
Antennas
Used to wirelessly
connect to 802.11a/b/g
adapters.
Page 3 / 8
3
Using The Setup Wizard
When you have completed
the steps in this
Quick
Installation Guide,
your
connected network should
look similar to this:
Open your Web
browser
and type
into the URL address
box. Then press the
Enter
or
Return
key.
The logon pop-up
screen will appear.
Type
“admin”
for the
username and leave the
password field blank.
Click
OK
Page 4 / 8
4
Using The Setup Wizard (continued)
Once you have
logged in, the
Home
screen will appear.
You will see the
following screens.
Click
Run Wizard
Click
Next
Page 5 / 8
5
Click
Next
Step 1
-
Set up your
new password
. You
have the option to
establish a password.
Click
Next
Click
Next
Step 2
-
Wireless Lan
802.11a Setup
The default wireless
settings are:
SSID =
default
Channel =
36
You can change these
settings to match an
existing wireless network.
Step 3
-
WEP Encryption
for 802.11a
The DWL-7000AP is capable
of 64, 128, and 152bit
encryption.
Select the key
size you wish to use and
enter the key in the field
provided. By default, WEP is
Disabled
.

Rate

3.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top