Page 6 / 34
Scroll up to view Page 1 - 5
6
Five Operational Modes
AP Mode
Bridge Mode
Page 7 / 34
7
Using the Configuration Utility
To configure the DWL-2700AP, use a computer which is connected to the DWL-2700AP
with an Ethernet cable (see the
Network Layout
diagram).
±
±
±
First, disable the
Access the Internet using a proxy server
function. To disable
this function, go to
Control Panel > Internet Options > Connections > LAN
Settings
and uncheck the enable box.
Start your web browser program (Internet Explorer, Netscape Navigator)
.
Type the IP address and http port of the DWL-2700AP in the address field
Enter
. Make sure that the IP addresses of the
DWL-2700AP and your computer are in the same subnet.
Page 8 / 34
8
Note: If you have changed the default IP address assigned to the DWL-2700AP,
make sure to enter the correct IP address.
Home > Wizard
The
Home>Wizard
screen will appear.
Please refer to the
Quick Installation Guide
for
more information regarding the
Setup Wizard
.
After the connection is established, you will see the user identification window as shown.
Using the Configuration Utility (continued)
±
±
±
Type
admin
in the
User Name
field
Leave the
Password
field blank
Click
OK
The DWL-2700AP is a Wireless Access Point. The setup wizard will guide you through the
configuration of the DWL-2700AP. The DWL-2700AP’s easy setup will allow you to have
wireless access within minutes. Please follow the setup wizard step by step to configure the
DWL-2700AP.
Page 9 / 34
9
Using the Configuration Utility (continued)
Home > Wireless
Channel-
6
is the default channel. All devices on the network must share the same
channel.
Wireless
Band-
802.11g
SSID-
Service Set Identifier (SSID) is the name designated for a specific wire-
less local area network (WLAN). The SSID’s factory default setting is
default.
The SSID can be easily changed to connect to an existing
wireless network or to establish a new wireless network.
SSID
Broadcast-
Enable or Disable SSID Broadcast. Enabling this feature broadcasts the
SSID across the network.
Radio
Frequency-
The radio frequency will remain at 2.437 GHz .
Apply-
Click
Apply
to save the changes.
Page 10 / 34
10
Using the Configuration Utility (continued)
Home > LAN
LAN is short for Local Area Network. This is considered your internal network. These are
the IP settings of the LAN interface for the DWL-2700AP. These settings may be referred
to as private settings. You may change the LAN IP address if needed. The LAN IP
address is private to your internal network and cannot be seen on the Internet.
Get IP From-
Select
Static (Manual)
or
Dynamic (DHCP)
as the method you
will use to assign an IP address to the DWL-2700AP.
Apply-
Default Gateway-
This field is optional. Enter in the lP address of the router on your
network.
Subnet Mask-
The subnet mask of the LAN interface.
The default subnet mask is
255.255.255.0
IP Address-
The IP address of the LAN interface. The default IP address is:
192.168.0.50
Click
Apply
to save the changes.
19216811.live