Page 21 / 53
Scroll up to view Page 16 - 20
21
Using the Configuration Menu (continued)
Tools > System
The current system settings can be saved as a file onto the local hard drive. The saved
file or any other saved setting file can be loaded back on the DWL-2000AP. To reload
a system settings file, click on
Browse
to browse the local hard drive and locate the
system file to be used. You may also reset the Wireless Access Point back to factory
settings by clicking on
Restore.
Click
Save
to save the current settings to the local Hard Drive
Click
Browse
to find the settings, then click
Load
Save Settings to
Local Hard Drive-
Load Settings from
Local Hard Drive-
Restore to Factory
Default Settings-
Click
Restore
to restore the factory default settings
Page 22 / 53
22
Using the Configuration Menu (continued)
Tools > Firmware
Firmware Upgrade-
Browse-
Click on the link in this screen to find out if there is an updated
firmware; if so, download the new firmware to your hard drive.
After you have downloaded the new firmware, click
Browse
in
this window to locate the firmware update on your hard drive.
Click
Apply
to complete the firmware upgrade.
You can upgrade the firmware of the Access Point here. Make sure the firmware you
want to use is on the local hard drive of the computer. Click on
Browse
to browse the
local hard drive and locate the firmware to be used for the update. Please check the
firmware upgrades to your hard drive from the D-Link support site.
Page 23 / 53
23
Using the Configuration Menu (continued)
Status > Device Info
This page displays the current information about the DWL-2000AP, such as the assigned
IP Address and the wireless settings.
The Log keeps a running log of events and activities occurring on the Access Point. If
the device is rebooted, the logs are automatically cleared. You may save the log files
under Log Settings.
Status > Log
View Log-
First Page -
The first page of the log
Last Page -
The last page of the log
Previous -
Moves back one log page
Next -
Moves forward one log page
Clear -
Clears the logs completely
Log Settings -
Brings up the page to configure the log
When you click on
Log Settings
in the
previous window, the window at left
appears. Select
Enabled
to save the
log. In the
Syslog Server
field, input
the IP Address of the computer on
the network to which you wish to
save the log settings. Click
Apply
to
save the
changes.
Page 24 / 53
24
Using the Configuration Menu (continued)
Status > Stats
The screen above displays theTraffic Statistics. Here you can view the amount of
packets that pass through the DWL-2000AP. The traffic counter will reset if the device
is rebooted.
Help
At the
Help
screen you can select from
Help
files displayed above.
Page 25 / 53
25
Using the Network Setup Wizard in Windows XP
In this section you will learn how to establish a network at home or work,
using
Microsoft Windows XP.
Note:
Please refer to websites such as
and
for information about networking
computers using Windows 2000, ME or 98.
Go to
Start>Control Panel>Network Connections
Select
Set up a home or small office network
Networking Basics
When this screen appears, Click
Next.
19216811.live